![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
Hello, I am kinda new here. I have a 1994 celica with a 3sgte swap with no engine mods but have a 3 inch dp and full 3 inch exhaust and a fcd, 4 inck air filter with custom air intake pipe and ebay special fmic. What I want to do is upgrade my turbo from the ct26. Dont want a ct27 or rebuild upgrade < figure I will want to upgrade again with these>Can I use any turbo I pick to my liking and bolt to my manifold with a adaptor or get a new manifold as long as I have A external wastegate and the down pipe that bolts to the turbo and exhaust. what I mean is if I have a turbo, wastegate and proper fittment to my manifold it will work? And also Do I have to have a ems to run right with the new turbo,I read that the ecu cuts out at 275 hp is that to the wheels or crank and is it the same for a jdm engine. Also ?i have some bigger injectors on my list to get is this a must with a new turbo?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
Read this... more then once...
http://www.mrcontrols.com/primers/power.htm -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jun 10, '08 From Virginia beach Currently Offline Reputation: 8 (100%) ![]() |
-------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 9:09 AM |