![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Apr 17, '07 From Montreal, QC, Canada Currently Offline Reputation: 1 (100%) ![]() |
Tried to tight the hand break cable inside the car, then tried to tight the springs behind the disks, still it only grips at the highest point... My father in law checked and he says it's the shoes that have to be replaced...
Is there any else to change when you put new rear brake shoes? They cost $30 on 1st Toyota parts so i though why not... i could buy new bleeders and calipers overhaul kit to make things better This post has been edited by reko: Mar 23, 2009 - 9:59 AM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 20, '08 From Abingdon, Maryland Currently Offline Reputation: 7 (100%) ![]() |
i just did my brakes and repalced the rear parkingbreak hardware kit because my pins were pretty straight, haha
the only place i could find that had it was through napa for 30 bucks, unless you wanna pay the $82 estimate that toyota gave me... ^.^ This post has been edited by Rymaster: Mar 26, 2009 - 12:42 PM |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 4:56 PM |