6G Celicas Forums

Welcome Guest ( Log In | Register )

> replacing thermostat..
post Apr 4, 2009 - 9:52 AM
+Quote Post
shegarhuney

Enthusiast
**
Joined Aug 29, '08
From AZ, US
Currently Offline

Reputation: 21 (100%)




i've been reading ALOT of post about it and it seems to me that its a easy fix.. everyone's saying its a easy job!!.. but the problem is there's no picts to illustrate it or like step by step!!.. everyone saying that its a easy fix but no1 mention how to do it!!.. i'm trying to replace mine and was wondering if i'm sure where its located.. its circled in RED in the picture!!.. is that it?? i own a GT so.. its underneath the alternator.. above the ac compressor.. on the end of the lower rad hose(passenger side).. next to the oil filter!!.. am i right??

n i read that the thermostat has to be placed like correctly if not it'll not work!!.. so i'll be grateful if some1 can post a pict of how its supposed to be placed!!.. i've the thermostat n how do you tell whats up n whats down?? i know the this little nipple like thingy..

most mods on my car are done by me.. i know what i'm doing.. (well.. most of the time..) i replaced my rotors.. install my springs n struts.. install gen5 mirrors.. etc etc etc.. so yup..

 
Start new topic
Replies
post Apr 4, 2009 - 10:20 AM
+Quote Post
eggman40



Enthusiast
****
Joined Aug 17, '04
From California
Currently Offline

Reputation: 20 (100%)




QUOTE (shegarhuney @ Apr 4, 2009 - 6:52 AM) *
i've been reading ALOT of post about it and it seems to me that its a easy fix.. everyone's saying its a easy job!!.. but the problem is there's no picts to illustrate it or like step by step!!.. everyone saying that its a easy fix but no1 mention how to do it!!.. i'm trying to replace mine and was wondering if i'm sure where its located.. its circled in RED in the picture!!.. is that it?? i own a GT so.. its underneath the alternator.. above the ac compressor.. on the end of the lower rad hose(passenger side).. next to the oil filter!!.. am i right??

n i read that the thermostat has to be placed like correctly if not it'll not work!!.. so i'll be grateful if some1 can post a pict of how its supposed to be placed!!.. i've the thermostat n how do you tell whats up n whats down?? i know the this little nipple like thingy..

most mods on my car are done by me.. i know what i'm doing.. (well.. most of the time..) i replaced my rotors.. install my springs n struts.. install gen5 mirrors.. etc etc etc.. so yup..



I was gonna make a write up when my car is up and running... but

just take those two bolts out that you have circled in your picture, ( you dont have to take the hose off) then, just replace the thermostat exactly in the position the stock one is in.

you may want to buy some thermostat housing sealant... i saw some at autozone. its about 3-4 bux for a tube. just put a little on the housing as there is no gasket. then just put everything back.

Here is a link on how to do it on a MR2. Its not mounted directly to the block like the celica but the idea is the same. I hope this helps. MR2 Mod project

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 11:33 PM