6G Celicas Forums

Welcome Guest ( Log In | Register )

> winsheild squirter lights, how do you install them
post Nov 25, 2003 - 6:48 PM
+Quote Post
krugball

Enthusiast

Joined Jun 30, '03
From Spring Grove, IL
Currently Offline

Reputation: 0 (0%)




I have some questions on these lights that i bought at autozone. Its a replacement for the winsheild washer fluid squirters. First is how do you take them out. Do you pry them off, or do you unscrew them from under the hood. If its under the hood, than do i take that padding off. The black circles dont seem to come out easily. It also needs a 12v adaptor for power, where can i find something to connect it to on the car. How do i ground the wire. How do i bring the wire to the console of the car, and finally how do i mount the little switch i bought. If anyone could help me it would be greatly appreciated.


Jason Kruger confused.gif
 
Start new topic
Replies
post Nov 26, 2003 - 12:12 AM
+Quote Post
kuya1284



Enthusiast
****
Joined Nov 15, '02
From Corona & Vallejo, CA
Currently Offline

Reputation: 0 (0%)




QUOTE (krugball @ Nov 25, 2003 - 4:48 PM)
I have some questions on these lights that i bought at autozone. Its a replacement for the winsheild washer fluid squirters. First is how do you take them out. Do you pry them off, or do you unscrew them from under the hood. If its under the hood, than do i take that padding off. The black circles dont seem to come out easily. It also needs a 12v adaptor for power, where can i find something to connect it to on the car. How do i ground the wire. How do i bring the wire to the console of the car, and finally how do i mount the little switch i bought. If anyone could help me it would be greatly appreciated.


Jason Kruger confused.gif

I agree with Andason... I HATE those things... but to remove your factory squirters, I believe you can use pliers under the hood to squeeze them at the base... you should then be able to pop them out. For power, you'll probably want to run a wire to your parking lights (front turn signals). If you want to connect them to a switch, you'll need to run a wire through the firewall... and tap into your dimmer.

This is all I'm gonna say to help... since I hate those things...

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 22nd, 2025 - 2:05 AM