![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 11, '09 From Baltimore, Maryland Currently Offline Reputation: 1 (100%) ![]() |
Hi all, Two days ago the check engine light came on. When I drive for 5 min the light comes on.
![]() I have a 3sgte out of a Caldina (ST215) and the use the stock JDM ECU, so I can't get codes from it. I don't see anything leaking and the car runs great. I have put about 800 miles on the car since i did the swap. What should I check first? |
![]() |
![]() |
|
Enthusiast ![]() Joined Jan 28, '07 From Québec, Canada Currently Offline Reputation: 1 (100%) ![]() |
did you bought a complete engine or a front clip from a caldina?
3SGTE gen 4 are OBDII if I'm not mistaken (I've never seen a jumper box on any gen 4 wiring harness), no more jumper box for testing and checking codes. If you bought a clip, I supposed that you installed the OBDII connector located under the steering wheel in the caldina front clip. If you didn't do it, you'll have no way to see what code is triggering your CEL. |
![]() ![]() |
Lo-Fi Version | Time is now: February 18th, 2025 - 12:08 PM |