ST205 RHD TO LHD, Conversion |
ST205 RHD TO LHD, Conversion |
May 5, 2009 - 3:51 PM |
|
Enthusiast Joined Jul 29, '07 From Quebec, Canada Currently Offline Reputation: 0 (0%) |
I already have a 1994 rev 3 3sgte celica
But I would like to know if it would be pain in the arshe to - buy a cheap (9K$) st205 RHD -buy a junkyard celica gt (1K$) LHD and convert it to lhd with an used LHD celica (not mine ) ?? I think it would be an easy way to have a LHD AWD 6gen at a moderate price! This question is because I don't know much about the LHD conversion of a car and looks like no member has done it before. Is there any reason? This post has been edited by domyz: May 5, 2009 - 3:58 PM |
May 8, 2009 - 6:06 AM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
Its really not rocket science to swap firewalls....
Doggy and I have both done it. It requires a LOT of drilling out tack welds along certain seams in order to remove it. As well as removing the OEM seam sealant material which is the biggest challenge of it all. Once all the welds have been drilled you can pull out the firewall (its very stuck in there) and replace it with the new wall. Then weld it into place and seal + paint 99% of the electronics come with the front cut as well as the RHD hardware. the worst part about my swap was that most the metal had rust on it and had to be sandblasted. |
Lo-Fi Version | Time is now: December 1st, 2024 - 1:26 AM |