 turbo beams??, turbo beams |
 May 17, 2009 - 1:19 AM
|
 
|
|
Enthusiast  Joined Oct 20, '08 From Lima,Peru Currently Offline Reputation: 0 (0%)  |
hi
ive been reading a lot of this...i recently own a beams rep top engine for my AT180 the engine is totally swaped..finally heres my doubt...i want to turbo my beams...i know its a high compression engine...so it need low compression pistons but ..does anyone know who can make me some forged pistons? what else should i need besides that? vvti have to be removed? from what ive read i know there are 2 succesfull turbo-beams..the hks and..a guy i think hes from uk thought and altezza-black top and 3sgte pistons wont fit...=( any ideas? does anyone have some info about this project? thanks in advance paul =) This post has been edited by paul52: May 17, 2009 - 1:23 AM |
 |
Replies
|
May 20, 2009 - 2:26 AM
|
|
 Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
QUOTE So when you pushing big numbers and not using your vvti anymore all your expensive beams is is a 3sge with slightly more aggressive cams and a shiny red rocker cover. so your better off with a 3SGE (IIIgen) for the high power NA route. how much bigger are the BEAMS cams? (III Gen In:252deg Ex:240deg) & compression goes from 10.3:1 to 11:1 your better off getting more agressive cams rather than getting the VVTi when tunning a ST205/3SGTE paul52 if you want to go turbo & keep VVTi I recommend the "turbo high comp beams" but I also say yes for a high reving screaming NA engine -------------------- |
Posts in this topic
paul52 turbo beams?? May 17, 2009 - 1:19 AM
azian_advanced but if you look closely to the pic of the HKS Beam... May 17, 2009 - 3:33 AM Cuts_the_Pilot you could leave it high compression and run low bo... May 17, 2009 - 4:45 AM Dragondog doing this to the beams will it still out pwr the ... May 17, 2009 - 1:43 PM delusionz I wouldn't mind VVT-i on my engine...when toyo... May 17, 2009 - 2:07 PM crankyelbow A low boost turbo beams would spool very very quic... May 17, 2009 - 2:25 PM Dragondog how well will the beams head work swaping it on th... May 18, 2009 - 5:16 AM delusionz Buy me one and I'll let you know May 19, 2009 - 5:35 PM Cuts_the_Pilot turbo high comp beams=good spool good off boost pe... May 20, 2009 - 12:40 AM delusionz why would you disable vvt-i? i'd just change t... May 20, 2009 - 5:02 AM Cuts_the_Pilot im only assuming the beams cams are slightly more ... May 20, 2009 - 6:07 AM Dragondog iv read that the 3sgte was basicaly a replacment o... May 20, 2009 - 6:10 AM Rusty QUOTE im only assuming the beams cams are slightly... May 21, 2009 - 3:42 PM Cuts_the_Pilot the early vvti are crude and only choose between a... May 21, 2009 - 4:34 PM Rusty 2. gen 3SGE
In: 244deg, 8.5mm lift (timing 7/57)
... May 21, 2009 - 8:26 PM Cuts_the_Pilot good work rustus, interesting to note the differen... May 22, 2009 - 10:55 PM Rusty plus if your using the head I think you need the b... May 24, 2009 - 2:14 PM paul52 ive been in exams i didnt have time to log in and ... May 24, 2009 - 9:01 PM Cuts_the_Pilot If you reckon OE pistons wont fit what makes you t... May 25, 2009 - 1:39 AM Dragondog im getting lost in the whole upgrading beams thing... May 29, 2009 - 5:49 AM
Rusty I'm having a bit of trouble understanding that... May 29, 2009 - 5:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 17th, 2025 - 10:46 AM |