![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Dec 21, '02 From Orlando Currently Offline Reputation: 0 (0%) ![]() |
I am near completion of my 2nd gen 3sgte swap in place of what formerly was a 7afe. I was wondering if anyone had completed the same swap and got their AC to work. I realize the compressor has to be changed, but just curious what you all did. Any help is appreciated. It's winter now, but I won't have a heater or defroster. Summer is what I'm REALLY worried about.
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
the compressors are intechangeable but the hose lines are ran differently.. at least between the 5s and the 3s... I would recomend checking the ac lines between a 5s and a 7a I am not sure if they are different or not. if they are different then get the 5s ones, that way you are not havin to redo all of the hose/lines.. as for hooking it up you are going to have to run it to a toggle switch inside the cab.. its the only way that I know how. When I 1st did the swap I left it out for the extra HP but think I will try and hook it up this time around.. there is a how to somewhere online to hook it up. Stipt found it I will ask him where it was or you can PM him.
-------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 12:55 PM |