How do you tighten up power windows or windows in general, windows seems loose and doesn't close all the way |
How do you tighten up power windows or windows in general, windows seems loose and doesn't close all the way |
May 30, 2009 - 7:26 PM |
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
my windows seems to be loose on both driver and passenger sides...when i was at a toyota dealership, i told them of this problem....they suggested that i might need an adjustment and tightening of the window to solve the problem...I don't want to resort to them because it's an arm and a leg....i have searched the forum here and couldn't find any info about tightening the windows....any one with any suggestions or tips to do it correctly? checked online as well and nothing helpful. how do i make sure the windows are where they should be or if the window is even loose? the reason i say this is because the window can flex back and forth (rattling when i close the door) easily compare to new car doors when i close it....not a solid closing sound, hence the window rattles...hopefully that makes sense to someone.
This post has been edited by chacha: May 30, 2009 - 7:27 PM |
Jun 5, 2009 - 4:08 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
when i did this... i just tightened the nut at the very bottom (behind that horizontal bracket). it solved all my noise issues until it got loose again. try that first and if it doesn't work out then go ahead and mess around with the adjustment screws everyone else suggested.
use locktite btw -------------------- |
Lo-Fi Version | Time is now: November 29th, 2024 - 11:06 AM |