 Just gonna get the gt32 will keep posted wit the install, How muck turbo lag will I get witha gt32 with .60 ar & .63ar rear? |
 May 24, 2009 - 7:07 PM
|
 
|
|
Enthusiast  Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%)  |
Just decided to get the garret gt32 kit and will keep posted on how it goes. Hopfully the kit arrive mid next week
This post has been edited by mk7celica: May 28, 2009 - 6:57 PM |
 |
Replies
|
Jun 9, 2009 - 12:35 AM
|
|
|
Enthusiast Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) |
I installed the turbo but it wont boost past 6-7 lbs and boost is hard to build its very slow. I was thinking when my old turbo broke maybe it tropped a code or I am in low boost? I did not reset the ecu do you think thats the problem is reseting the ecu a must when changing a bad turbo? I might have bad hose going to the turbo to the acuator I will change the tommorow and reset the ecu by pulling the fuse. Also noticed the wastegate flap is not shut firmly its shut all the way but theres alittle play. Will this cause my problem also? It dont sound like the tubo is spooling up fast nor a big amount. Any help would be great thanks
|
|
Jun 9, 2009 - 6:51 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (mk7celica @ Jun 9, 2009 - 12:35 AM)  I installed the turbo but it wont boost past 6-7 lbs and boost is hard to build its very slow. I was thinking when my old turbo broke maybe it tropped a code or I am in low boost? I did not reset the ecu do you think thats the problem is reseting the ecu a must when changing a bad turbo? I might have bad hose going to the turbo to the acuator I will change the tommorow and reset the ecu by pulling the fuse. Also noticed the wastegate flap is not shut firmly its shut all the way but theres alittle play. Will this cause my problem also? It dont sound like the tubo is spooling up fast nor a big amount. Any help would be great thanks sounds like your wastegate is stuck open, or you have a major boost leak. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
mk7celica Just gonna get the gt32 will keep posted wit the install May 24, 2009 - 7:07 PM
Fastbird For the money, just find a good used CT20B. Altho... May 24, 2009 - 7:11 PM mk7celica Well the inlet side still spins good not even grin... May 24, 2009 - 7:16 PM mk7celica The deal on the turbo kit on 6gc can some one tell... May 24, 2009 - 7:21 PM lagos QUOTE (mk7celica @ May 24, 2009 - 8... May 24, 2009 - 7:57 PM
mk7celica QUOTE (lagos @ May 24, 2009 - 8:57 P... May 24, 2009 - 9:25 PM mk7celica I found a good deal on a garrett gt series turbo i... May 24, 2009 - 9:56 PM laff09 Will the GT3582 clear the hood? May 25, 2009 - 11:22 AM mk7celica It will with my ram air hood not my carbon hood May 25, 2009 - 1:22 PM pittfirefighter NOOOO way too big of a turbo on your setup... gt35... May 25, 2009 - 4:27 PM _Jim_ QUOTE (pittfirefighter @ May 25, 2009 - ... May 25, 2009 - 6:02 PM mk7celica yea found that out from a freind that had hellish ... May 25, 2009 - 5:16 PM 3WayStunna Sounds like a refurbished or just brand new turbo ... May 25, 2009 - 9:02 PM Smaay Actually a GT3582 wont have that much lag. i have ... May 26, 2009 - 10:35 AM Nartanian The GT3582 would actually be amazing! Remember... May 26, 2009 - 10:49 AM Cuts_the_Pilot the 2zz spools up turbos very well due to the high... May 27, 2009 - 3:58 AM mk7celica Its similar to a gt2871r the turbo I am lookinag a... May 27, 2009 - 8:17 PM Cuts_the_Pilot a .60 front and .63 rear would be a good size snai... May 27, 2009 - 9:54 PM NGHTKD Im in a similar situation. Im turbocharging my 5sf... May 28, 2009 - 1:28 AM mk7celica QUOTE (NGHTKD @ May 28, 2009 - 1:28 ... May 28, 2009 - 1:53 AM mk7celica QUOTE (NGHTKD @ May 28, 2009 - 2:28 ... May 28, 2009 - 1:57 AM NGHTKD Im getting my turbo from a company called HyperGea... May 28, 2009 - 2:07 AM lagos i like the 2871 but ive heard of creep issues with... May 28, 2009 - 9:17 AM presure2 QUOTE (lagos @ May 28, 2009 - 9:17 A... May 28, 2009 - 9:30 AM Smaay the 5S-FTE should actually spool a little faster b... May 28, 2009 - 7:41 PM Nartanian And this time remember to put on a BOV. May 28, 2009 - 8:40 PM mk7celica QUOTE (Nartanian @ May 28, 2009 - 8... May 28, 2009 - 8:48 PM Nartanian QUOTE (mk7celica @ May 28, 2009 - 8... May 28, 2009 - 9:54 PM presure2 i dont get this thread.
seriously.
you ask for hel... May 29, 2009 - 8:19 AM mk7celica Well you said dont make new threads so I used a ol... May 29, 2009 - 5:54 PM presure2 im not trying to be rude here, just trying to keep... May 29, 2009 - 6:04 PM mk7celica QUOTE (presure2 @ May 29, 2009 - 7:0... May 29, 2009 - 7:18 PM mk7celica gt32 deal fell through maybe for the good. I decid... May 31, 2009 - 8:36 PM presure2 QUOTE (mk7celica @ May 31, 2009 - 8... Jun 1, 2009 - 6:18 AM Celicia CT20b was the best plan.. only get the Gt35 or GT3... Jun 1, 2009 - 11:50 AM DEATH It's also always a good idea to reset your ECU... Jun 9, 2009 - 7:53 AM mk7celica no boost leak I tested that for about 3 hours sund... Jun 9, 2009 - 9:20 AM lagos do u have an aftermarket downpipe? Jun 9, 2009 - 10:11 AM mk7celica Yes I do but it worked fine with the old ct26. Jun 9, 2009 - 8:56 PM mk7celica Ok today I checked out some things and ran into a ... Jun 9, 2009 - 9:02 PM delusionz I had a CT20b go bad on me, Diagnosed as excessive... Jun 10, 2009 - 8:58 AM TRD_Ian QUOTE (delusionz @ Jun 10, 2009 - 9... Jun 11, 2009 - 10:24 PM AnaXyd Well, what is the best turbo for the 7A-FE? And wh... Jun 11, 2009 - 5:53 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 6:26 PM |