Anybody here installed HID's in the fogs?, If you have, please take a look.. Options

[AnaXyd]

Hello!

I ordered some HID's for my fog lights. When they came today, I was really happy and thought this would be a straight bolt-on experience. But no.

HOW am I supposed to get all that wiring inside the fog light cover on the backside? Because, there is four cables which should go inside there...

- 2 cables from the xenon bulb and out
- 2 cables from the original socket where you put the original H3 bulb. They are supposed to go out too.

It almost looks like this:



The four cables, and a rubber cover thing. This is from another car, though, and it is not H3 connectors on the blue and black cable. But you guys will understand!

I cant see a way through this to just do a modification to the cover on the backside. I must drill some huge holes in it, and seal it with some silicone. Thats the only way I have figured now. But maybe some of you guys here know another better way? Maybe a way to bypass any modification?

This post has been edited by AnaXyd: Jun 17, 2009 - 5:30 PM

[trdproven]

what i did was remove the negative terminal on the inside of the fog light, then plug these two to those wires. positive and negative, you will have trouble getting it into the factory harness, it simply won't fit.