MY TIME HAS COME.....5SFTE, check out this video i found when i was back in hawaii... Options

[aznpnoiboi55]

hey dudes its finally my turn....ive officially started on it on wed jun 17 2009....and im doing the t3/t4 turbo set up....my goal is to be the first 6gc on maui or hawaii to be boosted....ive been searching for all the information i needed to start my set up and thanks to pressure and all the other 5sfte members...you all inspired me...ive been doing my research for about 2 years now and i learned a lot to know...well idk what else to say but this is my write up and i will be updating this with pix and all that stuff....shoots!

This post has been edited by aznpnoiboi55: Sep 29, 2009 - 2:53 PM

[presure2]

it really depends on what you wanna use, and where you are planning on mounting the filter for the relocation.

a generic parts like would look somthing like this to give you an idea.

canton block adapter
x4 1/2npt to -10 fittings
x4 -10 hose ends where you mount the filter will dictate what style fittings you will need. i use 2 straight ones, and 2 90* swivel ends.
-10 stainless braided hose
transdapt filter adapter
teflon tape (never use teflon tape on a -an fitting. only on the NPT fittings.)
you can get everything from summitracing or any place like that. (although im not sure if they sell canton stuff, if they dont you can get it right from canton. or you can get the moroso one that summit sells, its the same thing basicly)
good luck with the project.