![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
(I have a 1994 celica ST 1.8L 7AFE)
i have replaced my valve cover before, but had access to alldata. i remember finding a diagram of where to put the extra sealant to ensure no oil will leak out (it was only in a few spots, i assume where the engine oil was most likely to leak from). but i do not have the diagram any more and would like to take my valve cover off, to paint. can any one tell me where to put the sealant? thanks This post has been edited by mgnt232: Jul 3, 2009 - 10:17 PM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) ![]() |
after you take off the valve cover just take the new gasket and a little handfull of gasket seal and rub it all over then put the gasket in. As long as you cover the whole gasket you should be good to go.
I am assuming you have 2.2 celica 1.8 may be the same. |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 5:16 AM |