 how to start, where to start |
 Feb 10, 2009 - 9:10 PM
|
 
|
 Enthusiast  Joined Feb 10, '09 From pa Currently Offline Reputation: 0 (0%)  |
i am not completly new to imports but i am new to celicas. right now my car is stock exept for a cold air intake. on other cars the first thing i did was upgrade the distributor, plugs, wires, injectors.etc so my question is what do i do first, where do i start
This post has been edited by babi_boi: Feb 10, 2009 - 10:10 PM |
 |
Replies
|
Jul 8, 2009 - 5:49 PM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
my gt4 out of the factory (with slightly elevated boost level) should be good for a mid 13 second run. if u had my motor directly swapped into ur car with the lower weight of your car, front wheel drive and good conditions, you may be able to find enough traction to run anywhere between a 13 second and a 14 second quarter, or you may end up spinning your front wheels on the spot.
at this stage if you still want to drive your car on the road you'll have to start looking at your wheels, brakes and suspension, or any use of power could end up dangerous for you. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Jul 9, 2009 - 1:37 PM
|
|
|
Enthusiast Joined Feb 10, '09 From pa Currently Offline Reputation: 0 (0%) |
QUOTE (delusionz @ Jul 8, 2009 - 5:49 PM)  my gt4 out of the factory (with slightly elevated boost level) should be good for a mid 13 second run. if u had my motor directly swapped into ur car with the lower weight of your car, front wheel drive and good conditions, you may be able to find enough traction to run anywhere between a 13 second and a 14 second quarter, or you may end up spinning your front wheels on the spot. at this stage if you still want to drive your car on the road you'll have to start looking at your wheels, brakes and suspension, or any use of power could end up dangerous for you. i plan on doing the wheels, brakes, suspension, etc as well as the motor. my plan is to get all the stuff and then do it all together. -------------------- BABI BOI
|
Posts in this topic
babi_boi how to start, where to start Feb 10, 2009 - 9:10 PM
bccentaur3 What upgrade dizzy and injectors? What size inject... Feb 10, 2009 - 10:29 PM babi_boi right now all is stock exept intake, car is runnin... Feb 10, 2009 - 11:39 PM
Mstoochn QUOTE (babi_boi @ Feb 11, 2009 - 12... Jul 8, 2009 - 6:00 PM bccentaur3 This aint a Honda buddy. Use ONLY toyota wires. Th... Feb 10, 2009 - 11:43 PM babi_boi so the stock wires are the best thing for this car... Feb 10, 2009 - 11:53 PM bccentaur3 IIRC a 3s swapped celica stock will run low 14... Feb 10, 2009 - 11:58 PM babi_boi thanks for the info, i will do some homework and l... Feb 11, 2009 - 12:16 AM blu94gt QUOTE (babi_boi @ Feb 10, 2009 - 11... Feb 11, 2009 - 3:10 PM babi_boi i am not sure what size the injectors are, they ar... Feb 14, 2009 - 9:40 PM bccentaur3 send your camshafts out to webcams and get the 294... Feb 15, 2009 - 12:38 AM yungnova QUOTE (bccentaur3 @ Feb 15, 2009 - 12... Mar 5, 2009 - 9:07 PM trdproven there are also DENSO iridium plugs and Magnecor 8.... Feb 15, 2009 - 3:35 AM babi_boi so where would i get these kind of wires, do i hav... Feb 22, 2009 - 9:42 PM babi_boi so i looked into getting the magnecor 8.5 mm wires... Feb 23, 2009 - 9:02 PM soulshadow From my experience, stock cars don't have much... Feb 24, 2009 - 12:17 AM babi_boi so if plugs and wires are not what u start with, t... Feb 24, 2009 - 10:57 AM Sinyk From what I'm reading, you are expecting to se... Feb 24, 2009 - 11:20 AM babi_boi QUOTE (Sinyk @ Feb 24, 2009 - 11:20 ... Feb 24, 2009 - 12:15 PM soulshadow If you just got your car I would suggest you to dr... Feb 24, 2009 - 12:10 PM babi_boi QUOTE (soulshadow @ Feb 24, 2009 - 12... Feb 24, 2009 - 12:22 PM st18 look up the vemon 400. Feb 28, 2009 - 7:23 PM babi_boi QUOTE (st18 @ Feb 28, 2009 - 8:23 PM... Mar 1, 2009 - 9:00 PM delusionz Sounds like you want to spend $1000 to get yo... Feb 28, 2009 - 8:04 PM babi_boi QUOTE (delusionz @ Feb 28, 2009 - 9... Mar 1, 2009 - 8:29 PM delusionz I'm talking all motor, you made no mention of ... Mar 1, 2009 - 8:52 PM babi_boi QUOTE (delusionz @ Mar 1, 2009 - 9:5... Mar 1, 2009 - 9:04 PM delusionz Hmm it sounds gimmicky.
All good in theory, the o... Mar 1, 2009 - 10:14 PM babi_boi QUOTE (delusionz @ Mar 1, 2009 - 10... Mar 1, 2009 - 10:28 PM delusionz Cold Air Intake, Having either the air filter outs... Mar 2, 2009 - 4:11 AM babi_boi QUOTE (delusionz @ Mar 2, 2009 - 5:1... Mar 2, 2009 - 3:00 PM presure2 the venom unit, if you wanna call it that, is a re... Mar 2, 2009 - 4:47 PM babi_boi QUOTE (presure2 @ Mar 2, 2009 - 4:47... Mar 2, 2009 - 6:21 PM ZGear Depends on the car....some may have initial power,... Mar 2, 2009 - 9:26 PM babi_boi QUOTE (ZGear @ Mar 2, 2009 - 9:26 PM... Mar 3, 2009 - 2:51 PM ksporry Babi,
Is your engine a 3S-GE? I got a 94 GT with ... Jun 9, 2009 - 7:29 AM babi_boi QUOTE (ksporry @ Jun 9, 2009 - 7:29 ... Jul 8, 2009 - 11:19 AM presure2 browse around the stickys.
the 3sgte is a turbod, ... Jul 8, 2009 - 12:55 PM babi_boi yes i know sorry. after i posted the last one i st... Jul 8, 2009 - 1:24 PM jimmykay before doing anything, set some goals that you wan... Jul 8, 2009 - 1:50 PM babi_boi thank you to all who have replied. my goal is to c... Jul 8, 2009 - 3:07 PM jimmykay QUOTE (babi_boi @ Jul 8, 2009 - 3:07... Jul 9, 2009 - 10:50 AM babi_boi QUOTE (jimmykay @ Jul 9, 2009 - 10:5... Jul 9, 2009 - 1:20 PM Smaay do you know how hard it is to make a 10 sec FWD c... Jul 9, 2009 - 11:03 AM babi_boi QUOTE (Smaay @ Jul 9, 2009 - 11:03 A... Jul 9, 2009 - 1:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 7:29 PM |