7afe timing belt help Options

[Hanyo]

anyone know the 7afe timing belt alignment marks and have pictures of them?


I know your suppose to set the crank at 0 degrees TDC on pistion number 1 but where is the camshaft pully marking?


I just did the timing belt on my 7afe and now i;m getting a knocking sound around 3k rpm. Its idles smooth and starts easily. My timing is at 15 degress when its suppose to be at 10. I cant adjust it either because its OBD2 and the ecu controls that.


I'm thinking i jumped a tooth on my timing belt. Anyone have an idea whats could be wrong?

This post has been edited by Hanyo: Jul 11, 2009 - 12:11 AM

[Hanyo]

It might not even be ur timing belt at all, if something causes a knock, OR ur knock sensor is defective, the ecu will retard your timing 10-15degrees

well i am suspecting the timing belt because it is the only thing that has changed since the car developed a knock.


And when i jump the engine to check the timing. it puts the car into limp mode that ensures no outside forces afect the timing. Even when it has been jumped its suppose to be at 5 degrees. which it is not at the moment.