6G Celicas Forums

Welcome Guest ( Log In | Register )

> FS ChrisD's Garage Clean-Out (Prices Dropped!), Wheels,intk,gauges,coil,fogs,exhst/dp,catchcan,raindeflector,more
post Jul 8, 2009 - 12:33 PM
+Quote Post
ChrisD

Enthusiast
*
Joined Jan 26, '05
From Calgary AB Canada
Currently Offline

Reputation: 2 (100%)




I seriously need to clear some space in my garage. So, I'm selling off a bunch of stuff I've got sitting around.

I am willing to deliver these in Calgary, or to the Ogopogo meet next month. However, I will not 'reserve' items. First to pay gets it. I won't bring larger items to the Ogopogo meet unless they are paid for.

All prices in US Dollars unless otherwise specified

Post here, PM me, or email me chris_dittrick@yahoo.ca for shipping quote. I prefer paypal for payment.

I have higher res images available upon request, by email only.

SOLD 3S-GTE Aluminum Straight Intake Kit for recirculated BOV's $90 canadian$ + shipping (used)
Includes everything shown in the 2nd pic. Aluminum pipe with 1" bung for BOV, 1/2" bungs for the other two hoses, 1x 3" silicone coupler, 2x 1" silicone couplers for BOV, AFM adaptor with rubber gasket, 2x 1" T-bolt clamps, 3x 3" clamps, and air filter. Filter is old and I suggest replacing. You will still need a 2.75" to 3" coupler to go from the intake pipe to the turbo. You could use a samco T-hose or have the intercooler inlet welded like I did. Worked very well.

http://gtfour.ca/DSC01901-1.JPG
http://gtfour.ca/forsale/intake1.jpg

Nordskog Intake Temperature Gauge $20 + shipping (price drop was $30 + shipping (new in box)
Green lighting to match factory gauges. I purchased from Summit ($65), although they say that it includes the sending unit it does not. These are available for $20. Silicone Intakes says they have them for $60 with the sending unit.



Mallory Promaster Coil -- $45 + shipping (price drop was $60 + shipping) (new in box)
Purchased from Summit ($86) http://www.summitracing.com/parts/MAA-29625/ , never got around to using it. Since I might not ever, might as well go to someone who can use it. Includes everything included in original package.



Hella 500 Fog Lights $45 + shipping (price drop was $55 + shipping) (new in box)
Purchase from Summit ($80) http://www.summitracing.com/parts/HLA-H13750611/ , never installed them. Cool lights though, I always intended to make some sort of bumper mount and have them in the middle rally style. Includes everything from original packaging. They are about 6" in diameter, maybe a tad more. 2 1/4" deep.



Injector Duty Cycle / A/F gauge: $40 + shipping (price drop was $50 + shipping)
New sells for nearly $100.



SOLD 3" Alltrac Cat Back Exhaust - HKS & Custom $100 + shipping (used, reasonable condition)
Uses an angle/slash cut Megan Racing muffler. 3" straight through. HKS pipe from midpipe to over axle peice. Over axle is custom. All mild steel. Had a *really* nice sound to it. Muffler tip is ~4.5". Will include a brand new silencer also. To install you will have to drill a small hole in the muffler tip and use a small nut/bolt.

http://gtfour.ca/forsale/exhaust1.jpg
http://gtfour.ca/forsale/exhaust2.jpg
http://gtfour.ca/forsale/exhaust4.jpg
http://gtfour.ca/forsale/exhaust3.jpg

SOLD Greddy PCV Catch Can $55 + shipping (used, good condition)
These seem to range new from $80-100. I used this on my car for several years with success. It is chrome, looks good in the engine bay. The hose outlets are the correct size for the Celica. I think it is 15mm but not 100% sure. It fits our cars, thats the important thing. smile.gif

http://gtfour.ca/forsale/greddy.jpg

SOLD XS Power Downpipe $50 + shipping (new in box)
Brand new, came with my ST205 exhaust but it is the Gen 2 version for the 3sgte. Support bracket not included as XS Power did not include it. 2 extra bungs. If you would like, I can also gasket match the flange for you so that the wastegate clears properly (they have issues with this). Includes gaskets/bolts.

http://gtfour.ca/forsale/downpipe.jpg

6 Gen II Side Feed Fuel Injectors (440cc/min)
$10 each for the 4 pulled from my working engine
$15 each for the 2 that have been cleaned & flow tested by WitchHunter
+shipping

Sold as is, includes what you see in the pic.



ST165 stock radiator fan $10 + shipping (price drop was $15 + shipping (used)
Sold as is, but worked fine. Motor was replaced a couple years ago, and likely has ~15,000 km's on it.



More stock parts (make offers, not looking for a bunch on these) (used)
-ST165 Starter - compatible with gen II and probably more
-ST165 throttle body, ISC
-ST185 throttle body, ISC
-ST165 throttle position sensor
-ST185 throttle position sensor
-Fuel pump resistor
-Fuel injector resistor pack
-St165 Coil







Various ST165 bodykit peices $35 + shipping for all 8 or $10 per peice (price drop was $10 per peice, $50 if you take all 8 + shipping (used)
Some are in ok condition, some would need to be sanded and painted. Do not include metal backings.



SOLD 6th Gen OEM Rain Deflector $50 + shipping (used)
Taken off of my ST205. One is in perfect condition, one has 2 cracks shown below. However they are in working condition and the clips are all good. Not sure, does it fit on the 5th gen too?

http://gtfour.ca/forsale/deflector1.jpg
http://gtfour.ca/forsale/deflector2.jpg
http://gtfour.ca/forsale/deflector3.jpg
http://gtfour.ca/forsale/deflector4.jpg

15" 7th gen GT wheels + tires -- $200 + shipping (price drop was $300 + shipping) (used)
Bridgestone Potenza RE92 tires, 195/60R15. Wheels are 6.5" wide, +39 offset, and ~21 lbs each. They fit perfectly, no rubbing on the ST165 even with lowered ride height. 1 has been curbed, shown in pics. Others in good condition. These wheels look fantastic on the 4th gens imho. I recently upgraded to Volk TE37's and now have no space in my garage. 2 tires are at 15%, 2 are at 40% (see pics as I am not an expert). Will ship at buyers expense and will deliver to Ogopogo meet next month if someone pays first.









Wheel 1 (worst condition)







Wheel 2





Wheel 3





Wheel 4





This post has been edited by ChrisD: Jul 17, 2009 - 10:27 AM


--------------------
1988 ST165 w/ 185 eng. Project
1994 ST205 WRC Project
2010 Acura RDX Turbo AWD "The DD"
 
Start new topic
Replies
post Jul 13, 2009 - 12:44 PM
+Quote Post
ChrisD

Enthusiast
*
Joined Jan 26, '05
From Calgary AB Canada
Currently Offline

Reputation: 2 (100%)




Intake, exhaust, downpipe, catch can, and rain deflectors all sold.

I believe I have responded to everyone who has inquired. Let me know if I forgot you.

This post has been edited by ChrisD: Jul 13, 2009 - 12:45 PM


--------------------
1988 ST165 w/ 185 eng. Project
1994 ST205 WRC Project
2010 Acura RDX Turbo AWD "The DD"

Posts in this topic


Reply to this topicStart new topic
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 10th, 2025 - 4:41 AM