What Wheel Spacer Size for Flush Fit Options

[Harold_Fastwaker]

I am trying to flush my "new" set of wheels on my celica. I have a list of measurements I just took and I am unsure if I did this right or not. I am also trying to figure out what tires I need but figure I will wait till I have spacers in to test out how the fitment will be. Then I will figure out what tire to wrap it with.


I have seen a celica running 19x8 +35 on the front and 19x9.5 +35 on the back with a fender roll and slight pull and it fit.


So here is my measurement list:

Currently I have 17x7 +40 with 225/45 R17 tires (all 4 wheels)
I have 1 inch spacing between the inside of my current tire and my strut housing.


I am trying to mount 17x8.5 +56 on the front and 17x9.5 +56 on the rear. From my measuring it seemed almost like I needed close to a 2inch spacer in the rear but that would definitely be alot lower than a +35. I figured I needed a 1 inch spacer in the front.


Anyone able to help me solve this issue.