*starting my turbo project* Options

[terbear4god4life]

i got a job!

haha

also i was wondering if i can still use my 2 1/2 piping just have the 3" down pipe?

so im gonna start buying parts and building a list for my 5sfte

i have been researching and id rather spend a lil bit of money at a time instead of the usual 3sgte big sum at once

..
.
.
.
.
.
.
soo i need some help building a parts list..im a cheap bastard lol.

so iv been reading i need to get a compression test cuz of my 230,XXX miles
is there any way to boost my car for under a 1000 bucks?



so far i have this
everything underlined is what i have


tial 38mm wastegate
Turbosmart Supersonic Blow Off Valve
lotek triple a-piller
prosport egt, wideband afr, boost gauges
a ebay 3sgte manifold ( i hear alot of bad stuff about them but i wont be running high boost...at all)
t3/t4 turbo
apexi neo (iv heard good and bad) or do i need a safc2??
460cc rx7 injectors
3sgte oil pan
ebay 10an adapter
ebay oil filter relocation
ebay oil feed and return lines
ebay intercooler kit
Walbro fuel pump
hks filter
metal head gasket
ngk spark plugs
obx wires


what more do i need?

This post has been edited by terbear4god4life: Jul 24, 2009 - 10:41 AM

[Promasta]

heres a start, probably missing a bunch of stuff:

460cc rx7 injectors
3sgte 2 bar map sensor
3sgte manifold
3sgte oil pan (50-75$) + KO racing -10an adapter
crapo ebay t3 adapter
garrett t3/to4e 46 trim with .63 exhaust housing
custom down pipe +DP flange
tial 38mm wastegate with 10psi spring
oil filter relocation (with the canton block adapter, transdapt filter relocator, and custom -10an stainless braided lines)
and of course the associated oil feed and return lines for the turbo.
a ebay FMIC + piping, couplers, and clamps
and a SAFCII for the noob (100-150used) or emanage ultimate or AEM FIC for more experienced.
Walbro fuel pump
Gauges