*starting my turbo project* |
*starting my turbo project* |
Jul 24, 2009 - 1:31 AM |
|
Enthusiast Joined Oct 10, '08 From sweet home, OR Currently Offline Reputation: 3 (100%) |
i got a job!
haha also i was wondering if i can still use my 2 1/2 piping just have the 3" down pipe? so im gonna start buying parts and building a list for my 5sfte i have been researching and id rather spend a lil bit of money at a time instead of the usual 3sgte big sum at once .. . . . . . . soo i need some help building a parts list..im a cheap bastard lol. so iv been reading i need to get a compression test cuz of my 230,XXX miles is there any way to boost my car for under a 1000 bucks? so far i have this everything underlined is what i have tial 38mm wastegate Turbosmart Supersonic Blow Off Valve lotek triple a-piller prosport egt, wideband afr, boost gauges a ebay 3sgte manifold ( i hear alot of bad stuff about them but i wont be running high boost...at all) t3/t4 turbo apexi neo (iv heard good and bad) or do i need a safc2?? 460cc rx7 injectors 3sgte oil pan ebay 10an adapter ebay oil filter relocation ebay oil feed and return lines ebay intercooler kit Walbro fuel pump hks filter metal head gasket ngk spark plugs obx wires what more do i need? This post has been edited by terbear4god4life: Jul 24, 2009 - 10:41 AM -------------------- |
Jul 24, 2009 - 12:52 PM |
|
Enthusiast Joined Aug 27, '07 From Summerville, SC Currently Offline Reputation: 0 (0%) |
i got a job! haha also i was wondering if i can still use my 2 1/2 piping just have the 3" down pipe? so im gonna start buying parts and building a list for my 5sfte i have been researching and id rather spend a lil bit of money at a time instead of the usual 3sgte big sum at once .. . . . . . . soo i need some help building a parts list..im a cheap bastard lol. so iv been reading i need to get a compression test cuz of my 230,XXX miles is there any way to boost my car for under a 1000 bucks? so far i have this everything underlined is what i have tial 38mm wastegate Turbosmart Supersonic Blow Off Valve lotek triple a-piller prosport egt, wideband afr, boost gauges a ebay 3sgte manifold ( i hear alot of bad stuff about them but i wont be running high boost...at all) t3/t4 turbo apexi neo (iv heard good and bad) or do i need a safc2?? 460cc rx7 injectors 3sgte oil pan ebay 10an adapter ebay oil filter relocation ebay oil feed and return lines ebay intercooler kit Walbro fuel pump hks filter metal head gasket ngk spark plugs obx wires what more do i need? HKS Filter? Filter for what? Oil? Fuel? Air? Also, you DON'T need new wires, your factory wires are more than enough for less than 10psi. When you order your wastegate, order it with the correct spring for the amout of pressure that you want to run, that way you don't have to dick around with an MBC/EBC. Another thing, the EGT is not as vital as a Wideband O2 or Boost gauge, so see what your budget allows and if you have the funds for an EGT then get one, if not its really no big deal, especially at the low amout of boost you'll be running. Yet, ANOTHER thing, to my knowledge there is no "kit" for an intercooler setup for the 5sfte. You will have to buy an intercooler, and then buy the piping and couplers and clamps seperately and piece it together yourself. Ask Manny (i don't remember) where he got all of his I/C piping, we bought Brent's from the same company and it worked beautifully!! Best of luck to you with your project. Take your time and do it right once, or spend the extra time and money to re-do it a second time! -------------------- www.tweakdperformance.com contact@tweakdperformance.com |
Lo-Fi Version | Time is now: December 2nd, 2024 - 12:42 PM |