 ebay dp went to grind and noticed not hitting flapper, Does a 2nd gen dp fit on a ct20b |
 Jul 18, 2009 - 10:28 PM
|
 
|
|
Enthusiast  Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%)  |
Ok I have a down pipe for a ct26 on my ct20b. I see there is 1 extra bolt hole. I removed it and it fit but I may be having issues because of it being a ct26 dp on a ct20b. Is there a problem with using this setup?
This post has been edited by mk7celica: Aug 13, 2009 - 7:00 PM |
 |
Replies
|
Aug 7, 2009 - 8:03 PM
|
|
|
Enthusiast Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) |
Yes my pump is a walbro 255. I just got home an decided to get a jump on taking off the dp. I noticed that a vacum cap was missing on the port thats suppose to be caped on the acuator for my mbc. Would the vacum cap missing cause me to have the issues I am having? Its the port that goes to the tvis. And also I have all nuts off the dp and most all the studs off but there is no room for the dp to come off do all the studs have to be removed to get off the dp?
|
Posts in this topic
mk7celica ebay dp went to grind and noticed not hitting flapper Jul 18, 2009 - 10:28 PM
presure2 the wastegate door hangs up on the flange of those... Jul 19, 2009 - 7:31 AM domyz I have an ebay downpipe and I would go with BERK D... Jul 21, 2009 - 7:39 PM mk7celica Tommorow I am going to try to fix the ebay down pi... Jul 31, 2009 - 8:38 PM presure2 yes, lots of guys do it to the cheapo ebay pipes. ... Aug 1, 2009 - 5:51 AM DEATH Just to be sure - you did change the fuel pump to ... Aug 5, 2009 - 7:29 AM mk7celica Does a 2nd gen 3sgte ct26 ebay dp fit a ct20b from... Aug 13, 2009 - 6:09 PM _Jim_ Yes Aug 13, 2009 - 7:18 PM mk7celica Well I went to grind down the flange and it dont l... Aug 13, 2009 - 7:34 PM
_Jim_ Have you actually checked the wastegate flapper do... Aug 13, 2009 - 7:44 PM mk7celica QUOTE (_Jim_ @ Aug 13, 2009 - 8:44 P... Aug 13, 2009 - 8:55 PM |
10 User(s) are reading this topic (10 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 24th, 2025 - 9:38 PM |