how bad is it Options

[spy00005]

well was painting my rims (refurbishing them whatever) i did them 2 at a time first front 2 then rear 2. front 2 everything was fine. but i took of the rear and came back like 10 min later an the car was on the floor. i always use those jack stands. the car had apparently rolled back a lil and the jack fell back. i didn't see any real damage can't tell yet for sure but the rear disk might be a lil roughed up an the metal around it is bent. the metal was easy 2 bend back. its stick but i always leave it in 1st and the e brake was all the way up. it fell would say about a foot to a foot and a half. wat type of damage should i be looking for. by the way i put a big rock behind the front wheel but seems it didn't help. will it be fine what do i look for. i know i know im so stupid but Ive worked on my car for about 2 years all types of things nothing like this has ever happened before.


these are basically the jack stands i used

[spy00005]

WELL its driving fine. sure it rolled back (im afraid that some one might have bumped into it) i can tell cuz of the marks left on the street you see the drag marks it rolled back.