boost leak?, not getting any boost :( |
boost leak?, not getting any boost :( |
Aug 31, 2009 - 4:42 AM |
|
Enthusiast Joined Apr 26, '09 From Australia Currently Offline Reputation: 1 (100%) |
so i have finished (maybe) my 5sfte conversion... when i fire it up, it runs and the boost gauge shows a manifold vacuum at idle.... but then when i rev it, it hits 0psi and goes no further...
It is also making a whistling sound (which would indicate a leak?) any ideas? -------------------- ST184R - Project 5S-GTE - Audio: Eclipse CD4000, SW7200, XA1000, SC8265, EA2000 Engine: Greddy eManage, 360cc Injectors, CT26, FMIC, Walbro 255, K&N Pod, Blitz MSTT, HKS SSQV, 3SGE Head Swap, Suspension/Brakes: craftz coilovers, Gen 3 Camry Hub Swap Wheels: ROH Boost-R 17x7 - Times: N/A: 16.73, FI: Coming Soon
NCP91R - Almost JDM - Audio: Eclipse SW7200, XA1000, Jaycar LLC Engine: Resinator Removed Exterior: Domo toy, Foglights Wheels: 15in Steelies Times: N/A: Coming Soon |
Aug 31, 2009 - 5:25 PM |
|
Enthusiast Joined Apr 26, '09 From Australia Currently Offline Reputation: 1 (100%) |
probably should clarify... it was not making boost under load either... i did take it for a brief drive, took it to 4-4500 rpm, and still nothing.
i have gone through and checked all my piping and it all appears to be secure... could perhaps the wastegate flap be stuck open? -------------------- ST184R - Project 5S-GTE - Audio: Eclipse CD4000, SW7200, XA1000, SC8265, EA2000 Engine: Greddy eManage, 360cc Injectors, CT26, FMIC, Walbro 255, K&N Pod, Blitz MSTT, HKS SSQV, 3SGE Head Swap, Suspension/Brakes: craftz coilovers, Gen 3 Camry Hub Swap Wheels: ROH Boost-R 17x7 - Times: N/A: 16.73, FI: Coming Soon
NCP91R - Almost JDM - Audio: Eclipse SW7200, XA1000, Jaycar LLC Engine: Resinator Removed Exterior: Domo toy, Foglights Wheels: 15in Steelies Times: N/A: Coming Soon |
Lo-Fi Version | Time is now: November 24th, 2024 - 4:47 PM |