7afe ebay Header MOD?, O2 sensor in the wrong spot Options

[RY0BI]

Now i bought the current Ebay header for the 94-99 celica which mine is a 96. Now my engine does have a cat but it is not off the exhaust manifold it is past the mid pipe, no worries there. Other than that it will take place completely of the one i have and everything looks like it will bolt on directly. The only difference is that the O2 sensor that they have on the ebay header has the bolt on style O2 sensor and mine is the screw in one. Also my current position is a lot lower on the exhaust manifold and reads all 4 cylinders where as the ebay header is on the left and reads only one cylinder. Someone has had to run into this. I know i could plug the bolt on hole by making a plate but what about my O2 sensor it would have to go much lower on the header to read all 4 cylinders? If I just keep it unplugged will it make my car run like crap?

Current Ebay Header

Thanks in advance for the help

[95CelicaST]

3SGE is a 2.0, and that header is meant for a 7AFE.

This is a GT header.


You can have a shop block off that o2 area and have them weld in a bung for yours. And the secondary section needs to be lengthened to meet up with your exhaust.

[solidxsnake]

Applcaition:

• Make/Year: Toyota Celica 1994 1995 1996 1997 1998 1999
• Model: ST Only
• Engine: 3SGE 1.8L L4(4 Cylinder/4CYL)

Note on this item: Not for GT 2.2L

I know the 3S-GE is 2.0L, so the description must be wrong.

This post has been edited by solidxsnake: Sep 1, 2009 - 10:32 PM