Car wont fire!, turns and turns, just wont fire! |
Car wont fire!, turns and turns, just wont fire! |
Sep 5, 2009 - 8:12 PM |
|
Enthusiast Joined Sep 4, '09 From Lancaster Pa. Currently Offline Reputation: 0 (0%) |
I replaced a head gasket last week in the 2.2. buttoned it back up, put the cams in on time to spec from all data. now the prick wont fire up, just keeps cranking. seems to have spark, definately have fuel to the cylinders. one weird thing is sometime when i turn the key off after trying to crank it, the fans come on, and my temp gage pins hot!? and they wont shut off unless i unplug the battery or i turn the headlights on then off....i didnt spot any blown fuses or melted wires on the main block under the hood or beside the steering column inside the car. anyone have any insight for me? im about lost on this damn thing and id hate to just trash it or part it out! Any help will be awesome, i miss driving my car!!!
|
Sep 6, 2009 - 6:14 PM |
|
Enthusiast Joined Aug 24, '09 From San Diego, Ca Currently Offline Reputation: 0 (0%) |
OK well if it pops, has good compression across the board and has fuel in all cylinders it's most likely an ignition timing problem of some sort. I know this may sound condescending, but did you hook up your spark wires correctly, I've had that problem in the past, you may also have a cracked distributor cap(have you checked all the wires with your timing light), damaged rotor or fried ECU.
It's very important you put your distributor in correctly and your rotor is oriented in the right direction when you are at TDC. This is the problem I'd place the most money on if I were betting. If this is off it will cause exactly the problem you have right now with timing. |
Lo-Fi Version | Time is now: December 1st, 2024 - 2:57 PM |