 ST205 Brake upgrade completed !, ST205 brakes on AT200 / ST204 |
 Sep 8, 2009 - 9:00 AM
|
 
|
 Enthusiast  Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%)  |
Details will follow later, hopeful;ly later today. I still need to work some more on the car but not the brakes, I have an issue with my driver side control arm that needs to be fixed, but brake-wise I'm done.
   quick teaser 15 mm spacers was needed to clear MY wheels calipers HAVE to be grind off and spacer was used to push the rotor OUT 3 mm in order to clear ball joint. Rotor is based on a Cadillac Catera 2001 and I used Stanless steel brake lines and were just perfect, not too long and not short at all I'll go over the whole thing later. BTW, I did install the rotors backwards  I was tired and overlooked that, but I'll fix that sometime during the week.
This post has been edited by Culpable04: Jan 4, 2010 - 12:46 PM --------------------  |
Posts in this topic
playr158 Good job dude, glad to see it all came together an... Sep 8, 2009 - 9:08 AM Tigawoods great install!
make a write up! Sep 8, 2009 - 10:09 AM yagamius nice work on this, will wait for the writing part Sep 8, 2009 - 2:42 PM njccmd2002 Question, has anybody tried fitting 7 gen calipers... Sep 8, 2009 - 8:11 PM Culpable04 7th gen brake kit is a bolt on afair, I had those ... Sep 8, 2009 - 8:33 PM
njccmd2002 QUOTE (Culpable04 @ Sep 8, 2009 - 8... Sep 9, 2009 - 8:52 AM bccentaur3 how is the 7th gen caliper with the weight of the ... Sep 8, 2009 - 9:25 PM Rusty sweet.
dont know if youve read this or not?
http:... Sep 9, 2009 - 12:56 AM presure2 nice stevenson! Sep 9, 2009 - 5:16 AM Culpable04 QUOTE (Rusty @ Sep 9, 2009 - 1:56 AM... Sep 9, 2009 - 7:59 AM Rusty QUOTE (Culpable04 @ Sep 10, 2009 - 12... Sep 10, 2009 - 3:06 AM Culpable04 QUOTE (njccmd2002 @ Sep 9, 2009 - 8... Sep 9, 2009 - 10:44 AM njccmd2002 QUOTE (Culpable04 @ Sep 9, 2009 - 10... Sep 9, 2009 - 11:07 AM Mstoochn culp, hope my rotors come soon i need that extra ... Sep 9, 2009 - 12:48 PM Stambo Very nice culp, i assume the spacers you received ... Sep 9, 2009 - 10:38 PM Culpable04 the caliper needs to sit on the back of the knuckl... Sep 10, 2009 - 8:31 AM Culpable04 a little better pictures, I swapped the rotors, an... Sep 13, 2009 - 2:52 PM presure2 that looks SWEETTTT stevenson! Sep 13, 2009 - 5:36 PM Culpable04 I finally got some time to take a few pictures for... Sep 29, 2009 - 7:09 PM Bigblock Hey Culpable04--Can I bring my Celi by for you to ... Sep 29, 2009 - 7:42 PM Rusty so if I have big enough rims I'd only need 2x ... Sep 30, 2009 - 12:01 AM delusionz GT4 brakes easier to get into SS-III than SS-II be... Sep 30, 2009 - 4:05 AM njccmd2002 QUOTE (delusionz @ Sep 30, 2009 - 4... Sep 30, 2009 - 10:11 AM Culpable04 Rusty,
not Big enough wheels but the correct offs... Sep 30, 2009 - 9:55 AM delusionz QUOTE (Culpable04 @ Oct 1, 2009 - 3... Sep 30, 2009 - 6:36 PM Culpable04 27 mm is the resulting offset
42 is the offset o... Sep 30, 2009 - 10:54 AM tysst202 so can this be done to a uk spec gt st202 with no ... Sep 30, 2009 - 4:04 PM Culpable04 Yes Sep 30, 2009 - 4:13 PM Culpable04 SS-III with superstrut has a different knuckle tha... Sep 30, 2009 - 7:15 PM Rusty confused again (because of spacers and rotors etc... Oct 31, 2009 - 12:37 AM Culpable04 sorry for taking long,
if you are trying to do t... Nov 2, 2009 - 9:50 AM Rusty Hmm Lubu hasn't been on since August, the thin... Nov 4, 2009 - 2:55 AM Culpable04 QUOTE (Rusty @ Nov 4, 2009 - 3:55 AM... Nov 4, 2009 - 7:22 AM Rusty Yea I understand culp, will also talk to guys on w... Nov 4, 2009 - 11:32 AM Culpable04 note to anyone doing this
buy new brake shims ( ... Jan 4, 2010 - 12:44 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 8:05 AM |