GB: Customized Trunk/Frame End Bar, GB: Customized Rear Under Brace Options

[vincent_doggy]

Customized Trunk/Frame End Bar - Polished Stainless Steel - inspired by C-One/Laile
Net Weight approx. 1.4kg
USD$120 + Shipping (usd$28-36)
Only fit for ST202 ST204 ST GT Hatch/Coupe/Convertible
ST205 - SORRY



My Production








Customized stainless steel made Rear Under Brace - inspired by Tanabe Sustec Rear Under Brace
USD$60 + Shipping USD$10 all over the world (Used to be usd$75 shipped)
Weighing approx 280g 350g
Only fit for ST202 ST204 ST GT Hatch/Coupe/Convertible ST205 - SORRY
"Under Brace bars are an excellent way of increasing underbody rigidity, they will reduce body flex while cornering and will obtain more responsive handling characteristics." The above statment just copy and paste from some other site, not my writing.
NOTE:
Please have your own judgement on how well the enhancement of handling after the installation of this brace.
I really don't have any spec of having faster lap on track, or better cornering...
So, if u dibs on it... pls don't blame me for buying a crap kinda things later on...

The Blue one is "Tanabe Sustec"



Final Version - More Heavy Duty = a little bit heavier = 350g










This post has been edited by vincent_doggy: Oct 10, 2009 - 7:00 PM

[whatthe]

Hey vincent as in your floor bar where does it get bolted on?


In this pic its bolted on on the one futher away from the rear. Does yours both on in the same position? Because in your one its bolted on closest to the rear end. Does it work on both pairs the one closest to the rear and the other one too? Sorry if it was difficult to explain.

This post has been edited by whatthe: Sep 25, 2009 - 12:48 PM

[vincent_doggy]

Hey vincent as in your floor bar where does it get bolted on?


In this pic its bolted on on the one futher away from the rear. Does yours both on in the same position? Because in your one its bolted on closest to the rear end. Does it work on both pairs the one closest to the rear and the other one too? Sorry if it was difficult to explain.

Yeah, u are right... as the trunk I installed the Bar, the interior plastic are all skin, seems I installed to the wrong spot.

And both pairs of holes are fit, I should install the bar to the further away from the rear like C-ONE

Since every spec are according to the C-ONE, so it will fit