Oil Question |
Oil Question |
Oct 4, 2009 - 4:33 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
I bought an oil drain bolt from Autozone and it came with a light blue rubber gasket. When I removed the original oil drain bolt, it was all metal and no gasket. Anyway, I completed the oil change and ran the car around the block. Oil level is good and there's no oil on or around the new oil drain bolt with the gasket. I should be all set right??
I did hand tighten the new bolt with gasket and gave it a 1/3" turn (a bit more than 1/4" because I figured the gasket would crush and seat a bit more than if it were just a metal bolt). This post has been edited by 6G96GT: Oct 4, 2009 - 4:34 PM |
Oct 4, 2009 - 5:44 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Alright, sounds good. Thanks!
|
Lo-Fi Version | Time is now: December 5th, 2024 - 5:18 PM |