LED Turn Signals with another question Options

[Random_Stranger]

Ok, I think I might be daring enough to try it. I know there is something I could use to allow the LEDs to signal normally, instead of the rapid flash. Which I was going to ask what I need and how to install it (and even where). But I also wanted to know if once I do this, would it affect the rear turn signals since the bulbs run at with more watts?

Thanks

[schmooot]

It's just a matter of changing your stock flasher relay with an aftermarket one. They are all over ebay but I'm not sure of the quality, as they are only a few bucks whereas an auto parts store will charge over 20 for one. The trick is finding one that plugs right in to your toyota...I got burned on ebay once before because it looked like it would fit but it didn't....it was only a few bucks but still it was a waste of time

This post has been edited by schmooot: Oct 6, 2009 - 2:33 PM

[Random_Stranger]

It's just a matter of changing your stock flasher relay with an aftermarket one. They are all over ebay but I'm not sure of the quality, as they are only a few bucks whereas an auto parts store will charge over 20 for one. The trick is finding one that plugs right in to your toyota...I got burned on ebay once before because it looked like it would fit but it didn't....it was only a few bucks but still it was a waste of time

Really? But what about the rear regular bulbs when I signal? Are they going to be normal? I can probably go to like Autozone or something and pick one up. I wouldn't imagine it being more than $12-15 for it. I just wanted to allow my car to accept LED turn signals, because I have some that I couldn't sell, and they are really nice, only that when they signal, you can hardly tell because it is happening so fast.

This post has been edited by Random_Stranger: Oct 6, 2009 - 4:40 PM