 So for Webcams, I need? |
 Apr 12, 2008 - 3:32 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
I'll be porting/polishing my cyl-head and sending my cams out to webcams (294 grind)...here's some quick questions...
1) With the head work (no shaving or milling, just porting and polishing (combustion chamber and exhaust side) will I need stiffer springs for the cams? 2) What do I need to do for the stock valves? Replace or re-shim? I have no clue here. Also, I checked out Jim Snoodgrass (he used only a 294 grind webcam and kept the stock exhaust cam, if I did that too...what would be the benefit vs. both, intake and exhaust 294's????? This post has been edited by 6G96GT: Apr 12, 2008 - 3:33 PM |
 |
Replies
|
Oct 10, 2009 - 6:40 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
"294"
valve lift = .322 duration = 246* "101" lift = .350 duration 250* (according to webcams, the 101 grind requires performance springs) i would stick with the 294 grind unless your really going for an expensive build n/a. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
6G96GT So for Webcams Apr 12, 2008 - 3:32 PM
6G96GT Sorry for an old post guys but I was searching for... Oct 6, 2009 - 10:03 PM Batman722 it depends on what grind you get for the cams. Oct 7, 2009 - 7:17 AM 6G96GT I am getting the 101 grind which is the mild impro... Oct 7, 2009 - 4:11 PM presure2 when he had the 294 grind, dustin loss maybe 5whp ... Oct 7, 2009 - 6:26 PM 6G96GT Alright, that's not too bad (5whp) in the lowe... Oct 7, 2009 - 8:30 PM
presure2 QUOTE (6G96GT @ Oct 7, 2009 - 8:30 P... Oct 8, 2009 - 4:46 PM 6G96GT Will do then. Thanks again for the reply. Oct 9, 2009 - 8:50 PM Rusty so these 101/294 regrind webcams, what size are th... Oct 9, 2009 - 11:33 PM 6G96GT OK, I guess I made a mistake then, I got the mild ... Oct 10, 2009 - 5:40 PM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 3:44 AM |