6G Celicas Forums

Welcome Guest ( Log In | Register )

> Few things to fix, New and ongoing issue
post Oct 12, 2009 - 6:24 PM
+Quote Post
kagemidnight



Enthusiast
*
Joined Jul 9, '09
From CT
Currently Offline

Reputation: 2 (100%)




I got my car back with a new 5sfe motor swapped in last week. I have a few kinks that I need to figure out though. First thing is, sometimes my car doesn't start or even turn over. I was told that the battery and alternator are both good but I have a bad terminal on the battery. This seems like an easy fix however, I want to make sure that it is actually the terminals and not something else. I can get it to start without popping the hood and making sure the terminal is snug on the battery, I just pop the clutch in and out a few times and it will usually start up.
Second problem is something that I just noticed today. My car was idling for a few minutes while I ran into a parts store, when I got back in I noticed that the temp was almost all the way up at the H. The second I start to drive the temp drops back down to normal. I somehow had a puncture in the top of my radiator cap so I replaced it thinking it had something to do with that, new cap,coolant is fine and it still idles hot. I took the vacuum hose off my intake and put a breather filter where it goes into the engine last night, could this be what is causing it? Please let me know, I would really appreciate it.
thanks.

This post has been edited by kagemidnight: Oct 13, 2009 - 11:49 AM
 
Start new topic
Replies
post Oct 15, 2009 - 7:15 PM
+Quote Post
kagemidnight



Enthusiast
*
Joined Jul 9, '09
From CT
Currently Offline

Reputation: 2 (100%)




how do I check my head for cracks/leaks? I'm most likely going to replace all the gaskets and seals, timing and drive belts, and also my thermostat because I think it went bad before all this happened. I should replace the water pump too?

Posts in this topic
- kagemidnight   Few things to fix   Oct 12, 2009 - 6:24 PM
- - Batman722   bad thermostat, overheating can easily kill the ne...   Oct 12, 2009 - 6:56 PM
- - kagemidnight   doesn't seem to be overheating though, just ab...   Oct 12, 2009 - 7:06 PM
|- - nics   QUOTE (kagemidnight @ Oct 12, 2009 - 5...   Oct 12, 2009 - 7:41 PM
- - kagemidnight   Talked to my mechanic today, I think we're goi...   Oct 13, 2009 - 11:33 AM
- - soulshadow   Make sure your coolant is overfilling out of your ...   Oct 13, 2009 - 7:23 PM
- - kagemidnight   The coolant is full. I also had to drive down the ...   Oct 13, 2009 - 8:06 PM
- - nics   uh ohhh seem like an internal leak there. coolant ...   Oct 14, 2009 - 2:49 PM
- - kagemidnight   brought it to toyota while I was on break today be...   Oct 14, 2009 - 9:49 PM
|- - soulshadow   QUOTE (kagemidnight @ Oct 14, 2009 - 9...   Oct 15, 2009 - 12:42 AM
- - Batman722   QUOTE (kagemidnight @ Oct 12, 2009 - 7...   Oct 15, 2009 - 12:29 AM
- - kagemidnight   ok so it started with a bad t-stat or something el...   Oct 15, 2009 - 10:44 AM
- - nics   i suggest you also check your head for cracks and ...   Oct 15, 2009 - 2:42 PM
- - presure2   did you do the timing belt before installing the n...   Oct 15, 2009 - 4:26 PM
- - kagemidnight   how do I check my head for cracks/leaks? I'm m...   Oct 15, 2009 - 7:15 PM
- - nics   visual inspection?? when i had my head gasket don...   Oct 15, 2009 - 7:52 PM
- - kagemidnight   so I got a quote for a full gasket kit from toyota...   Oct 15, 2009 - 10:52 PM
|- - nics   QUOTE (kagemidnight @ Oct 15, 2009 - 8...   Oct 16, 2009 - 1:29 AM
- - kagemidnight   I might just try and stick it out with the OEM toy...   Oct 16, 2009 - 9:44 AM
- - bmj67   no point in holding off on the water pump. you mi...   Oct 16, 2009 - 12:29 PM
- - kagemidnight   only holding off on the pump because I am tapped f...   Oct 16, 2009 - 1:07 PM
- - nics   QUOTE (bmj67 @ Oct 16, 2009 - 10:29 ...   Oct 16, 2009 - 1:10 PM
- - bmj67   so just get a reman water toyota water pump they a...   Oct 16, 2009 - 3:37 PM
- - kagemidnight   I have till next Wednesday to think about it all. ...   Oct 17, 2009 - 2:10 PM
- - kagemidnight   What will happen if you don't replace the valv...   Oct 20, 2009 - 2:31 AM
- - kagemidnight   So i replaced the headgasket. The old one didn...   Oct 26, 2009 - 11:51 AM


Reply to this topicStart new topic
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 23rd, 2025 - 7:05 AM