 Turbo help and questions, Noob needs help restoring turbo celica |
 Sep 22, 2009 - 12:08 PM
|
 
|
|
Enthusiast  Joined Sep 11, '09 From NYC Currently Offline Reputation: 2 (100%)  |
Hi, I am trying to piece this turbo celica back together and I have some questions. I am new to celicas and everything.
First is this sensor, I have a picture of it from my car but it's not the best, I will try to get a better pic of it. I just want to know what sensor that is(MAP?) and how to mount it onto the IC/intake pipes.  In this picture it's the sensor right next the coupling between the intake and the BOV pipe.  I also want to know how easy it is to weld a 1G DSM BOV onto the piping I am using. I bought the whole BOV with the stock piping, but the piping is way too small to work with. What are other ways to make this work? I can't seem to find the right coupling size to fit this to my IC piping. I have other problems with leaking oil, but I am in the process of getting the oil feed fitting by mail and waiting to install it. Thanks Batman for the hookup. I will probably be using this posting for any other questions or problems I run into later down the road of getting this car back to running good. BTW, this was owned by a past member from this site, which I recently found out. His name was Shin on the boards..just a little FYI..haha. This post has been edited by ravinaziankid: Oct 4, 2009 - 6:30 PM |
 |
Replies
|
Oct 19, 2009 - 11:58 AM
|
|
|
Enthusiast Joined Sep 11, '09 From NYC Currently Offline Reputation: 2 (100%) |
OK, got the car running and boosting, just needs a tune and some gauges installed. I just need to know what the stock injector size are for the 5sfe or how to tune using the SAFC2. Also, when installing the wideband, which 02 section should I install it in? Is there one after downpipe?
Does anyone have a basic setup for their SAFC2 that I can run first and then go from there? That would help a lot. |
|
Oct 19, 2009 - 4:24 PM
|
|
 Enthusiast Joined Jul 22, '06 From San Antonio / georgetown, Texas Currently Offline Reputation: 9 (100%) |
QUOTE (ravinaziankid @ Oct 19, 2009 - 11:58 AM)  OK, got the car running and boosting, just needs a tune and some gauges installed. I just need to know what the stock injector size are for the 5sfe or how to tune using the SAFC2. Also, when installing the wideband, which 02 section should I install it in? Is there one after downpipe? Does anyone have a basic setup for their SAFC2 that I can run first and then go from there? That would help a lot. http://www.6gc.net/forums/index.php?showto...hl=afc+settings some basic settings to start from. just be sure to tweak them to your engines needs --------------------  |
Posts in this topic
ravinaziankid Turbo help and questions Sep 22, 2009 - 12:08 PM
95CelicaST Didn't JDM guy turbo Shin's car?
I would... Sep 22, 2009 - 2:02 PM delusionz Air temp sensor for the intake, this belongs in th... Sep 24, 2009 - 2:44 AM ravinaziankid Oh so that's the IAT sensor..I was thinking of... Sep 24, 2009 - 9:21 AM ravinaziankid Well I got the new turbo in..the old turbo was pre... Sep 29, 2009 - 1:32 PM ravinaziankid Update again.
I am leaking oil from where the oil... Oct 4, 2009 - 6:29 PM
 |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 8:38 AM |