6G Celicas Forums

Welcome Guest ( Log In | Register )

> ST185RC 3sgte HELP, wire location
post Oct 21, 2009 - 5:42 PM
+Quote Post
speedy



Enthusiast
*
Joined Aug 17, '03
From new jersey
Currently Offline

Reputation: 0 (0%)




Hey,

I have a huge quetion... You might be a little sick of answering this but it has a twist... I'm doing a 3s swap. The ecu part # is not readable. I believe it is a ST185RC. I have no stock IC parts besides the charge cooler. I know if it is a 185RC ECU I have to ground the WIN/ABS pin on the 3rd connector. Also, I have to loop/ground the level sensor harness.

This is where the twist comes and I need some help... on the level sensor there is 2 wires wht-blk=ground-->??? & gry-red=signal-->???

The ground is on E2 2nd plug right now the signal wire is not hooked up at all. I am not sure if that wire goes to the ECU or went to the intercooler ECU which I dont have.

So if you could help me out and tell me where the grey wire with the red stipe goes I will be home free with this nightmare.

Also, if anyone has ST185RC engine and sensor wiring diagrams that would be great I have the ecu pinout already but they don't tell me what color wire goes where. I can't tell on my own cuz the harness was all chopped up and wire colors don't really match so I ne the paper work so I can put this together

Thanks
 
Start new topic
Replies
post Oct 22, 2009 - 12:09 AM
+Quote Post
speedy



Enthusiast
*
Joined Aug 17, '03
From new jersey
Currently Offline

Reputation: 0 (0%)




@ domyz thx

@ dustin I don't think defgeph remembers

*sigh* I'm screwed... does anyone else have anything for me

Posts in this topic
- speedy   ST185RC 3sgte HELP   Oct 21, 2009 - 5:42 PM
- - dustin15brown   defgeph has a st185rc   Oct 21, 2009 - 6:13 PM
- - domyz   I had an st185 rc, let me check that when I ll hav...   Oct 21, 2009 - 8:52 PM
- - speedy   @ domyz thx @ dustin I don't think defgeph re...   Oct 22, 2009 - 12:09 AM
- - Smaay   why dont you just get a USDM ECU   Oct 22, 2009 - 10:04 AM
- - speedy   I dont want to use the USDM ECU just because I don...   Oct 23, 2009 - 11:57 PM
- - speedy   update: the code is gone. when I test the CEL just...   Oct 24, 2009 - 4:44 PM
- - SwissFerdi   Might be a noob idea on my part, but doesn't u...   Oct 24, 2009 - 4:57 PM
- - speedy   Nope, I had the ECU completely unhooked, checked t...   Oct 24, 2009 - 5:18 PM
- - speedy   ::Resolved::   Oct 28, 2009 - 12:39 AM
- - njccmd2002   what was it?   Oct 28, 2009 - 9:45 AM
- - speedy   QUOTE (njccmd2002 @ Oct 28, 2009 - 3...   Oct 30, 2009 - 2:32 PM


Reply to this topicStart new topic
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 1:03 AM