4A-GE 20V + 6Speed + 1.8l displacement, omg, am I crazy only thining it? Advices please!! Options

[Demios]

Hi there!
I'm sooo excited! I just read some info on the web about the last 4A-GE 20Valves built for some Corolla and thought this:

Is it possible swap a 4A-GE 20Valves (it doesn't matter if a Black or Silver top, the difference explained in the documents I read is not that much) into a Celica with the 6 speed manual gearbox made with some blacktop?

And secondly, is it possible and wise increase the displacement of the engine from 1.6l to 1.8l? If yes 'cause this doesn't give problems to the intake and this one is large enought to support 0.2l more, wich parts must be used? I mean, the only difference is the stroke so i need the 7A block or i can do that with something smaller?

[delusionz]

4age is good in a small car like a Levin, But is piss weak in the heavier Celica.

3S-GE or GTE is what you want. The poor little 4age would have to rev to 4000 just to bring up some torque to get the car rolling.

[soulshadow]

4age is good in a small car like a Levin, But is piss weak in the heavier Celica.

3S-GE or GTE is what you want. The poor little 4age would have to rev to 4000 just to bring up some torque to get the car rolling.

X2

Its like putting a 4 cylinder in a semi truck.

[Kiamycelica]

4age is good in a small car like a Levin, But is piss weak in the heavier Celica.

3S-GE or GTE is what you want. The poor little 4age would have to rev to 4000 just to bring up some torque to get the car rolling.

X2

Its like putting a 4 cylinder in a semi truck.

Our celicas are light as ****? about 500lbs lighter than preludes and accords. Were right there with civics.