Starting A New Journey |
Starting A New Journey |
Sep 28, 2009 - 9:38 PM |
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
So, I had planned on buying a 3sgte next summer after I finished the 350z project and had some time to do all the proper research. Trying to decide which gen 3s I wanted, my power goals, what tranny, and all that.... and then a guy an hour or so from me posted a gen 2 clip for sale.
So here it is. Gen 2 st185 rhd clip. Drove an hour or so to pick it up..... and yes i know it looks like a mess right now, trying to move it with a cherry picker sucked into that little bitty ass trailer. But here's a few pics: and yes, i took a lot of shi* off to get the chains to work and get it in the trailer This post has been edited by dustin15brown: Jul 25, 2010 - 7:37 PM -------------------- |
Oct 1, 2009 - 7:51 PM |
|
Enthusiast Joined Jan 18, '07 From Bergen county NJ Currently Offline Reputation: 24 (100%) |
Belts
Thermostat Plugs gaskets clutch rear main seal water pump im sure there are more -------------------- |
Oct 2, 2009 - 2:32 AM |
|
Enthusiast Joined Jan 10, '09 From Burtonsville, Maryland Currently Offline Reputation: 1 (100%) |
Belts Thermostat Plugs gaskets clutch rear main seal water pump im sure there are more also check out the 2nd gen body and chassis manual.. as well as engine.. find out what plugs goes where.. wiring up the ECU will be time consuming.. but not hard in my opinion.. if you read in advance it'll save you more time when your ready to start the wiring. You will do fine =) -------------------- THIS IS WHERE WE HOLD THEM!
Still trying to find the cure for ST205 asthma.. 6gc.net's outlaw vigilante because im a LEADER not a follower. |
Oct 23, 2009 - 10:20 PM |
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
Belts Thermostat Plugs gaskets clutch rear main seal water pump im sure there are more also check out the 2nd gen body and chassis manual.. as well as engine.. find out what plugs goes where.. wiring up the ECU will be time consuming.. but not hard in my opinion.. if you read in advance it'll save you more time when your ready to start the wiring. You will do fine =) plugs i'm usually pretty good with after the nightmare of the 350z. Although I need to get the harness to tweak so he can rig it all up for me Also thinking of picking up a ct 20-b to help things run a little more efficiently.... -------------------- |
Lo-Fi Version | Time is now: November 30th, 2024 - 12:50 AM |