ST185RC 3sgte HELP, wire location Options

[speedy]

Hey,

I have a huge quetion... You might be a little sick of answering this but it has a twist... I'm doing a 3s swap. The ecu part # is not readable. I believe it is a ST185RC. I have no stock IC parts besides the charge cooler. I know if it is a 185RC ECU I have to ground the WIN/ABS pin on the 3rd connector. Also, I have to loop/ground the level sensor harness.

This is where the twist comes and I need some help... on the level sensor there is 2 wires wht-blk=ground-->??? & gry-red=signal-->???

The ground is on E2 2nd plug right now the signal wire is not hooked up at all. I am not sure if that wire goes to the ECU or went to the intercooler ECU which I dont have.

So if you could help me out and tell me where the grey wire with the red stipe goes I will be home free with this nightmare.

Also, if anyone has ST185RC engine and sensor wiring diagrams that would be great I have the ecu pinout already but they don't tell me what color wire goes where. I can't tell on my own cuz the harness was all chopped up and wire colors don't really match so I ne the paper work so I can put this together

Thanks

[speedy]

update: the code is gone. when I test the CEL just continually blinks. I have tried resetting the ECU, I removed the fuse and disconnected the Batt.

But, the CEL stays on when i start the car...

Does anyone have any ideas what to do from here?

This post has been edited by speedy: Oct 24, 2009 - 4:49 PM