 FS: TRD stuff - *SOLD!* |
 Oct 26, 2009 - 3:29 AM
|
 
|
|
Enthusiast Joined Dec 27, '08 From New Zealand Currently Offline Reputation: 0 (0%)  |
SOLD
Hi everyone, I am selling the stuff I was planning to put into my car. These parts are suitable for Currens and Celicas (ST202/206 3S-GE) Corner caps, leads and exhaust are sold- just the Struts left! Curren corner caps NZ$100 - Sold Metallic blue, and difficult to find. So far as I know these will also fit onto Celicas?  One needs TLC as it has a crack and other minor damage. It has two small holes, one being a piece about the size of a 20c piece which is included- I’m assuming this can be plastic welded or filled in?  TRD Ignition leads - NZ$200 - Sold 5mm, Red, unused in box. TRD part number 19051-ST000 for 3S-GE engines.  TRD muffler - NZ$150 This is a TRD muffler for a Celica ST202, which I purchased a while back. It has TRD embossed on one side and the genuine TRD plate on the other with the part number: 17400-ST000. You cannot buy this from TRD any more as it has been discontinued The inlet is 2.25 inch/ 60mm, and the outlet is 3.75 inch/ 95mm.   Please note it will need to be welded on as a previous owner cut the pipe off, but there is still a collar that the exhaust pipe can be welded to. The muffler's in pretty good shape - no dents and the mounting brackets are still attached. It just needs a bit of a clean up, and with a bit of a sand and polish it should come up great. TRD Adjustable Struts & Springs - NZ$800 Adjustable TRD suspension for superstrut Celicas and Currens. This came with my car when I bought it five years ago, and from then they’ve been boxed up and taking up space, unused as it required too much effort to turn them into pogo sticks. lol These lowered the car considerably from stock, and cost heaps to buy new- was very unreliably informed that they retailed for around NZ$6k?  Part numbers on them are: Front struts are 48508-ST060 (GH-09 KYB), Front springs are 48231-SP000-06 Rear struts are 48021-ST070 (G1-07 KYB) Rear springs are 48131-SP000-08 They appear to be in pretty good condition- there are no leaks, dents or buckling that I can see, and the ball joints on the sides of the rear suspension look pretty good- no cracking in the rubber, they move around firmly without any crunching or slackness. I am based in New Zealand so I figure overseas shipping makes them somewhat expensive, but if you pay for the shipping, I am willing to do so, and am getting quotes now. Let me know if you have any queries- thanks everyone! This post has been edited by Sick_Puppy: Feb 1, 2010 - 6:58 AM |
 |
Replies
|
Oct 27, 2009 - 3:55 AM
|
|
|
Enthusiast Joined Dec 27, '08 From New Zealand Currently Offline Reputation: 0 (0%) |
Hey there, these are the rear caps for the Curren... If you like I can price them for you, although shipping to HK could be somewhat expensive?
|
|
Oct 27, 2009 - 4:09 AM
|
|
 Enthusiast  Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) |
QUOTE (Sick_Puppy @ Oct 27, 2009 - 4:55 PM)  Hey there, these are the rear caps for the Curren... If you like I can price them for you, although shipping to HK could be somewhat expensive? Check the shipping for me, I think the shipping might be even cheaper... since we are closer Do u have a pics that the rear caps on a curren bumper? wanna check out the fitting, but if u sure those are remove from a Curren, then would be alright. Paypal ready or u can have any of stuffs for trade if interested. Thanks in advance!! Vince -------------------- |
|
Oct 27, 2009 - 11:40 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (vincent_doggy @ Oct 27, 2009 - 4:09 AM) QUOTE (Sick_Puppy @ Oct 27, 2009 - 4:55 PM) Hey there, these are the rear caps for the Curren... If you like I can price them for you, although shipping to HK could be somewhat expensive? Check the shipping for me, I think the shipping might be even cheaper... since we are closer Do u have a pics that the rear caps on a curren bumper? wanna check out the fitting, but if u sure those are remove from a Curren, then would be alright. Paypal ready or u can have any of stuffs for trade if interested. Thanks in advance!! Vince vince, you need to fiberglass those puppies and send them to the u.s. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Posts in this topic
Sick_Puppy FS: TRD stuff - *SOLD!* Oct 26, 2009 - 3:29 AM
vincent_doggy Curren corner caps NZ$100
Metallic blue, and... Oct 26, 2009 - 5:00 AM
freddy121389 QUOTE (vincent_doggy @ Oct 26, 2009 - 6... Oct 26, 2009 - 7:47 AM trdproven I'm interested in the exhaust, do you know if ... Oct 27, 2009 - 8:19 AM Sick_Puppy QUOTE (trdproven @ Oct 27, 2009 - 8... Oct 27, 2009 - 2:13 PM trdproven QUOTE (Sick_Puppy @ Oct 28, 2009 - 5... Oct 28, 2009 - 4:35 AM vincent_doggy QUOTE (trdproven @ Oct 28, 2009 - 5... Oct 28, 2009 - 4:47 AM Sick_Puppy QUOTE (trdproven @ Oct 27, 2009 - 8... Oct 29, 2009 - 5:21 AM vincent_doggy As long as u reserve for me is fine!! Oct 29, 2009 - 11:02 AM 25thcelica 2nd dibs on exhaust if trdproven does not go for i... Oct 30, 2009 - 10:25 PM Sick_Puppy Sweet- still trying to box them properly- had to g... Oct 30, 2009 - 11:56 PM iburnslabs im interested in the TRD struts........ they look ... Oct 31, 2009 - 2:04 AM Sick_Puppy QUOTE (iburnslabs @ Oct 31, 2009 - 2... Oct 31, 2009 - 5:26 AM iburnslabs QUOTE (Sick_Puppy @ Oct 31, 2009 - 4... Oct 31, 2009 - 6:52 PM Sick_Puppy QUOTE (iburnslabs @ Oct 31, 2009 - 6... Nov 1, 2009 - 2:57 AM pipes if he doesnt want the trds i do shipping to 02136 ... Oct 31, 2009 - 6:57 PM iburnslabs QUOTE (pipes @ Oct 31, 2009 - 5:57 P... Oct 31, 2009 - 7:44 PM pipes QUOTE (iburnslabs @ Oct 31, 2009 - 8... Oct 31, 2009 - 7:57 PM iburnslabs no that answers my questions, and i would like the... Nov 1, 2009 - 10:41 AM Ruroniarc If things fall through with the Curren Splitters, ... Nov 1, 2009 - 6:15 PM Sick_Puppy Hey guys, I'm getting quotes for these now- I... Nov 29, 2009 - 9:30 PM Rusty just wanted to add some info sick_puppy
The TRD ... Nov 30, 2009 - 1:03 AM Artega QUOTE (Rusty @ Nov 29, 2009 - 11:03 ... Nov 30, 2009 - 11:40 AM vincent_doggy QUOTE (Artega @ Dec 1, 2009 - 12:40 ... Nov 30, 2009 - 11:49 AM captb im interested in the caps if "all of the abov... Nov 30, 2009 - 3:26 AM Sick_Puppy Rusty and Vincent Doggy- thanks guys! I'd ... Nov 30, 2009 - 5:44 PM Sick_Puppy These are the same caps on another car- it took me... Nov 30, 2009 - 6:06 PM cyprus_gt hi mate
did you receive my pm about the trd plug l... Dec 1, 2009 - 2:58 PM Sick_Puppy Hey Cyprus GT, hope you got my PM- the leads were ... Dec 3, 2009 - 2:42 AM Sick_Puppy Cyprus GT, I *might* have another set of leads ava... Dec 3, 2009 - 5:16 AM vincent_doggy Paypal'd for Curren rear extension!! Dec 5, 2009 - 6:00 AM Sick_Puppy QUOTE (vincent_doggy @ Dec 5, 2009 - 6... Dec 5, 2009 - 6:44 AM Dave_ss2 Ill have those struts!! How much would shi... Dec 29, 2009 - 3:57 PM Sick_Puppy QUOTE (Dave_ss2 @ Dec 29, 2009 - 3:5... Dec 30, 2009 - 4:00 AM OOBE Aw man. I wanted the exhaust. Jan 1, 2010 - 5:30 PM Sick_Puppy All gone- thanks everyone! Feb 1, 2010 - 6:57 AM |
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 8:13 PM |