FS: TRD stuff - *SOLD!* Options

[Sick_Puppy]

SOLD

Hi everyone, I am selling the stuff I was planning to put into my car. These parts are suitable for Currens and Celicas (ST202/206 3S-GE)

Corner caps, leads and exhaust are sold- just the Struts left!

Curren corner caps NZ$100 - Sold
Metallic blue, and difficult to find. So far as I know these will also fit onto Celicas?



One needs TLC as it has a crack and other minor damage. It has two small holes, one being a piece about the size of a 20c piece which is included- I’m assuming this can be plastic welded or filled in?



TRD Ignition leads - NZ$200 - Sold
5mm, Red, unused in box. TRD part number 19051-ST000 for 3S-GE engines.



TRD muffler - NZ$150
This is a TRD muffler for a Celica ST202, which I purchased a while back. It has TRD embossed on one side and the genuine TRD plate on the other with the part number: 17400-ST000. You cannot buy this from TRD any more as it has been discontinued

The inlet is 2.25 inch/ 60mm, and the outlet is 3.75 inch/ 95mm.



Please note it will need to be welded on as a previous owner cut the pipe off, but there is still a collar that the exhaust pipe can be welded to. The muffler's in pretty good shape - no dents and the mounting brackets are still attached. It just needs a bit of a clean up, and with a bit of a sand and polish it should come up great.

TRD Adjustable Struts & Springs - NZ$800
Adjustable TRD suspension for superstrut Celicas and Currens. This came with my car when I bought it five years ago, and from then they’ve been boxed up and taking up space, unused as it required too much effort to turn them into pogo sticks. lol

These lowered the car considerably from stock, and cost heaps to buy new- was very unreliably informed that they retailed for around NZ$6k?



Part numbers on them are:
Front struts are 48508-ST060 (GH-09 KYB),
Front springs are 48231-SP000-06

Rear struts are 48021-ST070 (G1-07 KYB)
Rear springs are 48131-SP000-08

They appear to be in pretty good condition- there are no leaks, dents or buckling that I can see, and the ball joints on the sides of the rear suspension look pretty good- no cracking in the rubber, they move around firmly without any crunching or slackness.

I am based in New Zealand so I figure overseas shipping makes them somewhat expensive, but if you pay for the shipping, I am willing to do so, and am getting quotes now.

Let me know if you have any queries- thanks everyone!

This post has been edited by Sick_Puppy: Feb 1, 2010 - 6:58 AM

[trdproven]

I'm interested in the exhaust, do you know if the hangars fit exactly on an USDM Celica GT? also can I get more pics from the tip side via pm? first dibs if I can.

[Sick_Puppy]

I'm interested in the exhaust, do you know if the hangars fit exactly on an USDM Celica GT? also can I get more pics from the tip side via pm? first dibs if I can.

TBH I don't know- does the GT model in the states have a 3S-GE engine? It's been a while since I've been on a non-NZ forum- between marriage, work and study I haven't had much spare time! lol

Only thing I can suggest is measure the mounting points on your model, or ask around? Otherwise you could modify them I guess... shipping could be a killer though! Wil measure up, take pics and get back to ya

Cheers!

[trdproven]

I'm interested in the exhaust, do you know if the hangars fit exactly on an USDM Celica GT? also can I get more pics from the tip side via pm? first dibs if I can.

TBH I don't know- does the GT model in the states have a 3S-GE engine? It's been a while since I've been on a non-NZ forum- between marriage, work and study I haven't had much spare time! lol

Only thing I can suggest is measure the mounting points on your model, or ask around? Otherwise you could modify them I guess... shipping could be a killer though! Wil measure up, take pics and get back to ya

Cheers!

not too concerned about what engine as long as the hangers would mount the exhaust. Can anyone verify the hangers are like st204?