![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
are the exhaust paths and hangers the same between the st204 and the st202 chassis?
|
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
Yup, they are the same for the back half. You will need to extend your b-pipe a bit but all the hangers work ect.
Dustin (batman722) was running an hks exhaust for the 202 on his 205 swapped gt, till the packing in the muffler started to collapse in the muffler. We cut the can off and welded on a magnaflow muffler. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
Yup, they are the same for the back half. You will need to extend your b-pipe a bit but all the hangers work ect. Dustin (batman722) was running an hks exhaust for the 202 on his 205 swapped gt, till the packing in the muffler started to collapse in the muffler. We cut the can off and welded on a magnaflow muffler. humm that sounds promising since i have a 205 mid pipe the only thing is i really dont want the tanabe can i was hoping to use the 205 can to keep things stock looking and then running an electronic bypass valve in the mid pipe |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 4:11 PM |