7A-FTE made in Germany Options

[Hafkai]

Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route.









The header will be done in the next days.



Short list of parts i'm using:
- Garrett T25 Turbo from a CA18DET
- Mitsubishi EVO 9 Intercooler
- E-manage Ultimate
- Innovate LC-1 Wideband
- ST202 3S-GE Injectors (372ccm)
- ST205 Fuel Pump
- Bosch Blow-Off from a Audi S3
- Custom Header and 3" Exhaust
- dozens of other small parts

[Hafkai]

After about 7k miles the engine still runs great, i did a compression test some weeks ago with ~190psi on all cylinders. The 7A really can take some abuse.. over 200 miles or 15 turns at the circuit without any problems, even at over 90°F ambient temperature.
The engine gets 10psi boost at all day driving and 7-9psi at the track, depending on the weather thanks to boost creep at low temps....
Oil consumption is a little bit high with almost 1L/1000km... but it could be worse
The fuel consumption is not bad with ~27 mpg overall and 20 mpg at the circuit.

I got a short video from the Autobahn, testing 100-200 km/h acceleration at 10psi Youtube