7A-FTE made in Germany Options

[Hafkai]

Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route.









The header will be done in the next days.



Short list of parts i'm using:
- Garrett T25 Turbo from a CA18DET
- Mitsubishi EVO 9 Intercooler
- E-manage Ultimate
- Innovate LC-1 Wideband
- ST202 3S-GE Injectors (372ccm)
- ST205 Fuel Pump
- Bosch Blow-Off from a Audi S3
- Custom Header and 3" Exhaust
- dozens of other small parts

[OOBE]

Well, the most important thing is to find a good tuner, and either use an e-Manage, or an AEM FIC, or better yet, a stand-alone EMS, because you NEED to be able to control timing if you want the engine to last. I've broken a piston three times in six years. The first two times were because of detonation, not boost level or leaning out. This engine advances timing a boatload when accelerating. You will not believe it. I wish I would've recorded when my tuner took timing readings with a very expensive digital timing light. It was unreal and we were surprised that the engine lasted through all that abuse with such advanced timing throughout these years. By the way, I just sold my e-Manage last week. It worked awesome, but I need more control of the engine because I'm aiming for good numbers now since I'm going with forged internals.