5th gen suspension on a 6th gen Options

[Joe_1985]

ok so i aquired a complete set of kyb shocks, h&r springs with boots bumpstops and mounts assembled

the rear set up ever thing bolts into place no problem

the front,99% seems to bolt up fine cept the brake hosess.

6th gens are held in with a 12mm skrew and bracket
5th gens are held inplace with a slider type clip, and the hose goes though the opening where the clip sits

ill try to take pics tomarrow

what i will try to do is take a washer that fits the 12mm skrew, put it behind where the hole is and get a correct fitting nut for the skrew as well.

ill post pics up tomarrow

also i noticed the front strut mounts are different, everything lines up fine but the mounts look alot different , but yet everything bolts on fine.

i wont be able to test it out till monday morning because i poped out the cv axles to replace em but im waiting for em to come in still, which will be monday

This post has been edited by Joe_1985: Nov 14, 2009 - 8:47 PM