alarm instal help Options

[Cormudgen]

Ok,

I began installing my alarm today and have a couple of questions. I have Coomer's wirin diagram

http://www.6gc.net/misc/images/other/rs650...all_diagram.jpg

but am not sure exactly where those wires are. I have removed the drivers side kick panel and have found about 4 different harness down there. For example at least 2 or 3 of the harness have a black and white wire.

A specific example of what I'm taling about is Coomer says in his diagram for the starte output wire coming off the alarm should go into the "black/white wire @ ignition harness" how do i know which one of those harness is down there is the ignition one?

Also in another post someone said
"Door locks are negative trigger.
In the left kickpanel blue/black is lock and blue is unlock. "

What harness would this be in?


Thanks
Cormudgen

This post has been edited by Cormudgen: Dec 14, 2003 - 4:53 PM

[Coomer]

The ignition harness is higher up than the kick panel, and is at the rear of your ignition switch. Here are a couple pics to help you out.




As far as door locks, I don't have the factory ones, so I'm not sure. If they're negative triggered though, when you lock your doors, the lock wire should give ground for a brief moment. When you unlock the doors, the unlock wire should give ground as well. You can use a multimeter to test these connections.

If you've got more specific questions, just ask, and I'll do my best to help.