alarm instal help Options

[Cormudgen]

Ok,

I began installing my alarm today and have a couple of questions. I have Coomer's wirin diagram

http://www.6gc.net/misc/images/other/rs650...all_diagram.jpg

but am not sure exactly where those wires are. I have removed the drivers side kick panel and have found about 4 different harness down there. For example at least 2 or 3 of the harness have a black and white wire.

A specific example of what I'm taling about is Coomer says in his diagram for the starte output wire coming off the alarm should go into the "black/white wire @ ignition harness" how do i know which one of those harness is down there is the ignition one?

Also in another post someone said
"Door locks are negative trigger.
In the left kickpanel blue/black is lock and blue is unlock. "

What harness would this be in?


Thanks
Cormudgen

This post has been edited by Cormudgen: Dec 14, 2003 - 4:53 PM

[aaronc222]

Don't know about theirs, but my alarm unlocks the doors for me. There are also extra outputs for anything I want to add(like rolling a window/sunroof up/down...). Not to mention the starter kill(car won't start without the alarm being turned off).

All the extra wires are for the features. And installing it yourself is the best option if you are competent with electronics. Almost all shops use the same locations for their alarm installs, which just makes it easier for theives. Doing it yourself you can hide things wherever you feel like it.