Starting The Project! :D, 1994 Celica ST Options

[NOVAKx17]

Where to start.....

i picked up this celica over the summer from a guy locally for 300 bucks...
it was hit in the front and needed both fenders, a hood, a bumper, all new lights,
((basically a whole new front end)) ..

i've found alot of the stuff i need and i'm starting to get it all ready to have it
painted.

but unfortunately i've ran into some rust issues i'm fixing here and there but all and
all its not too bad.

this will be a continuous thread of my progress throughout the winter and hopefully
finishing in spring if it all goes good

first things first, so far i've collected 2 new hoods, a passenger side fender, passenger
side lo and hi beams, and a driver side hi beam light, and as of today i bought a new
stock bumper on ebay!

So needless to say all i'm in search of now is a driver side fender and driver side lo beam.


All i've really done so far is got it stripped down and started to sand , and just as a little treat to myself i've installed some new white face gauges

here are some pics of the progress so far!



















And More To come, i'll try to update every day !

Enjoy

feel free to drop suggestions anytime

This post has been edited by NOVAKx17: Nov 16, 2009 - 12:48 AM

[CastrolCelica]

Why did a new speedometer display come before new rotors?

This post has been edited by CastrolCelica: Nov 16, 2009 - 10:54 AM

[NOVAKx17]

Why did a new speedometer display come before new rotors?

because i'm debating on weather or not to do a drum to disc conversion...
and i had already purchased the gauges for my 93 celica, but they sent the wrong
ones and also sent me the right ones free of charge

[CastrolCelica]

Why did a new speedometer display come before new rotors?

because i'm debating on weather or not to do a drum to disc conversion...
and i had already purchased the gauges for my 93 celica, but they sent the wrong
ones and also sent me the right ones free of charge

Good luck if you decide to do that. Personally, I think you should be fine the way they are, but that's just my opinion.

[NOVAKx17]

i haven't really seen any pros and cons to either one,

does it really make a difference?

if not i'd like to just keep it the same.

[CastrolCelica]

i haven't really seen any pros and cons to either one,

does it really make a difference?

if not i'd like to just keep it the same.

If you upgrade to newer rotors, and don't bother with the drum to disk conversion, I don't think you'll notice anything drastic. Personally, I can stop very well with my setup, and it doesn't require any handy work .