CANT GET THE NEW ENGINE TO START Options

[Gtguy22]

So i have finally gotten the 94 gt engine into the car. It was a real pain, basically had to use the jdm engine as a long block, and switch everything over. Well after doing the timing belt, water pump. switching fuel rails and intake manifold, exhaust manifold, ect, I finally finished, sure enough, the car turns, but wont start. After doing all this, i dont even know where to start. If anyone could help, i would really appreciate it.

[Gtguy22]

probably, I honestly dont even know. All i know is i was under the impression that this was my exact engine, that is what the idiot at the jdm place told me, regardless, i switched everything over, and dropped it in the car. Cant get it to start, dont know about the grounds and where they go, i just wwent out and bought a timing light, but i really dont know how to use it.

[SlvrCelica09]

probably, I honestly dont even know. All i know is i was under the impression that this was my exact engine, that is what the idiot at the jdm place told me, regardless, i switched everything over, and dropped it in the car. Cant get it to start, dont know about the grounds and where they go, i just wwent out and bought a timing light, but i really dont know how to use it.

well man, it looks like your gna need to do some researching. 1st thing I would do is take a pic of your engine.. and post here.. someone on this forum should be able to recognize your engine, and tell which one exactly it is.
Then do some reasearch on that engine and figure out where the grounds go. Once everything is plugged in correctly.. try and start the car. If the car is turning over but not starting.. then its probably not getting any fuel.. I would advise you to make sure the fuel pump is working correctly and that it is getting fuel. If its not even turning over.. check to make sure you are getting spark.. perhaps you will need to change your spark plugs or wires.. If youve done all these things and still no go.. then perhaps you need to adjust your timing.. you will need to research how to adjust it.