JDM Tails, -- Options

[Hazmat]

I will be picking up a pair of JDM Tails soon and I have a question for anyone out there that has a pair regarding the installation process. After looking over http://www.6gc.net/forums/index.php?showtopic=40179, I'm curious to know if there is actually 4 spots for the light sockets to plug into or 3. The pictures from the Auction show 3 sockets while in the guide it shows 4? If it is only indeed 3 and you do infact have to remove the 4th, which bulb was the 4th one to? Reverse or? If you removed it how did you go about with the leftover wire/socket without bulb?

Edit-- Got them on and they are looking great! Very happy with them!



This post has been edited by Hazmat: Dec 9, 2009 - 7:56 PM

[Hazmat]

There are actually 5 bulbs on the USDM tail lights, and 4 bulbs for the JDM tail lights.

For the USDM harness, there are 4 large bulbs, and 1 small bulb. The small bulb is the one you are not going to be using when installing your JDM tails. It is the bulb farthest on the outer sides of the tail lights.

My tail lights came with the JDM harness, so I did not have to do anything but plug and play. But if you do not have the JDM harness, your options could be to remove the bulb, and then tape up the plug so that no water gets in. Or you could cut off the plug entirely and then tape up the ends so that they don't touch anything. You could even go as far as removing those 2 wires completely from the harness.

Thats some great info to know. Really appreciate it masked! I will be trying to get a pair from RPM garage and I'll be sure to ask if it comes with the JDM Harness. Thanks everyone

This post has been edited by Hazmat: Nov 21, 2009 - 5:45 PM