 alarm instal help |
 Dec 14, 2003 - 4:51 PM
|
 
|
 Enthusiast  Joined Jul 31, '03 From GA Currently Offline Reputation: 0 (0%)  |
Ok,
I began installing my alarm today and have a couple of questions. I have Coomer's wirin diagram http://www.6gc.net/misc/images/other/rs650...all_diagram.jpg but am not sure exactly where those wires are. I have removed the drivers side kick panel and have found about 4 different harness down there. For example at least 2 or 3 of the harness have a black and white wire. A specific example of what I'm taling about is Coomer says in his diagram for the starte output wire coming off the alarm should go into the "black/white wire @ ignition harness" how do i know which one of those harness is down there is the ignition one? Also in another post someone said "Door locks are negative trigger. In the left kickpanel blue/black is lock and blue is unlock. " What harness would this be in? Thanks Cormudgen This post has been edited by Cormudgen: Dec 14, 2003 - 4:53 PM |
 |
Replies
|
Dec 16, 2003 - 8:17 PM
|
|
 Enthusiast Joined Aug 29, '02 From Dallas, Tx Currently Offline Reputation: 0 (0%) |
Like you said just be glad it wasn't something broken!
Coomer, you said you don't have factory locks. I'm getting ready to do this same thing with my alarm install. Any advice? Any tricks getting it to work with the alarm? |
Posts in this topic
Cormudgen alarm instal help Dec 14, 2003 - 4:51 PM
Coomer The ignition harness is higher up than the kick pa... Dec 14, 2003 - 11:45 PM subsolo_21 You guys had to get those up-town fancy alarms. I ... Dec 14, 2003 - 11:56 PM aaronc222 Don't know about theirs, but my alarm unlocks ... Dec 15, 2003 - 1:03 AM Coomer QUOTE (aaronc222 @ Dec 14, 2003 - 10:03 PM) Don... Dec 15, 2003 - 1:13 AM Drocay wut type of Alarm do u have coomer. Dec 15, 2003 - 1:17 AM Cormudgen thanks, coomer. that was the info i needed. i ho... Dec 15, 2003 - 1:55 AM Cormudgen anyone have any thoughts on my last post?
i'm... Dec 15, 2003 - 12:57 PM aaronc222 QUOTE (Coomer @ Dec 14, 2003 - 11:13 PM) Mine has ... Dec 15, 2003 - 1:57 PM Coomer I have an Autopage RS-650 that I really like a lot... Dec 15, 2003 - 9:01 PM SpedToe169 If the battery is dead it sounds like the alternat... Dec 15, 2003 - 9:51 PM Cormudgen ok i got it workin and im almost embarrased to adm... Dec 16, 2003 - 12:43 AM Coomer QUOTE (SpedToe169 @ Dec 16, 2003 - 5:17 PM) Coomer... Dec 17, 2003 - 1:10 AM SpedToe169 That would be great if you have one handy, but don... Dec 18, 2003 - 10:40 AM Coomer QUOTE (SpedToe169 @ Dec 18, 2003 - 7:40 AM) T... Dec 18, 2003 - 9:05 PM SpedToe169 Thanks coomer!
Ok, one more ?
I bought a S... Dec 19, 2003 - 11:46 AM SpedToe169 Ok, I pulled a good one. I came home for christma... Dec 21, 2003 - 1:58 PM Cormudgen i'll be happy to help. as i just finsiehd mine... Dec 21, 2003 - 2:01 PM Coomer John,
My locks only have two wires coming out of t... Dec 21, 2003 - 5:12 PM SpedToe169 I think the diagram you supplied pretty much is th... Dec 22, 2003 - 1:48 AM Cormudgen ok, i'm super tired right now and dont have an... Dec 22, 2003 - 1:59 AM SpedToe169 I totally understand. I'm going to be as well... Dec 22, 2003 - 2:08 AM Coomer I mounted my brain above the center vents in the c... Dec 22, 2003 - 2:36 AM SpedToe169 Ok, now we're getting some where. I've go... Dec 22, 2003 - 11:51 AM Coomer QUOTE (SpedToe169 @ Dec 22, 2003 - 8:51 AM) The mo... Dec 22, 2003 - 8:59 PM SpedToe169 It came with a manual, but its obviously not meant... Dec 23, 2003 - 12:47 AM Coomer QUOTE (SpedToe169 @ Dec 22, 2003 - 9:47 PM) It cam... Dec 23, 2003 - 1:15 AM Andason Do a how to .... darr Dec 23, 2003 - 2:14 AM Coomer QUOTE (Andason @ Dec 22, 2003 - 11:14 PM) Do a how... Dec 23, 2003 - 2:54 AM SpedToe169 Its a compustar, the new ss model....I'd have ... Dec 23, 2003 - 3:17 AM SpedToe169 Ok, I'm doing pretty good, but I'm stuck o... Dec 23, 2003 - 3:55 PM SpedToe169 Also, anybody know where the trunk trigger is? Th... Dec 23, 2003 - 4:37 PM
SpedToe169 Done!!! I'm finally done!... Dec 24, 2003 - 4:47 PM |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 3:34 AM |