6G Celicas Forums

Welcome Guest ( Log In | Register )

> Torque and maybe swap, kinda long sorry bout that
post Dec 2, 2009 - 11:05 PM
+Quote Post
6G96GT

Enthusiast
***
Joined Jan 20, '08
From East Coast
Currently Offline

Reputation: 1 (100%)




So, I am wondering what torque gains/losses would I see for the following on my current 5sfe;

Performance Header (ported with head to match flow characteristics)
Stock piping diameter from front to back but with a High Flow Cat and with a Performance Resonator
SRI with Perf. Filter
Webcams 294 grind (mild option)

I am wondering because I am trying to figure out how much torque I should have vs the stock torque of a 3sge engine.

My mech. friend has made an offer I cannot refuse but I want to see if it's worth it or not. My 5sfe engine is in excellent shape and I had a lot of work done to it probably equaling around 5G's this summer. Anyway, my friend offered to fully swap my 5sfe out for a purchased (by me) 3sge including all of the modding and wiring work necessary along with the tranny, ecu, and wiring work for the completed swap.

How much torque does a 3rd gen JDM 3sge engine have? This is what I am looking at buying with the amount and who it'll be bought from:
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...#ht_1651wt_1167

I know the bid ended but he has informed me that they have many, many more. The good thing about this place is they take a video of the actual engine showing the ID numbers in the video and do a compression test on that actual engine in the video and then send that engine to you.

This post has been edited by 6G96GT: Dec 2, 2009 - 11:06 PM
 
Start new topic
Replies
post Dec 3, 2009 - 3:53 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




if i were you i wouldnt spend any more money on the 5sfe. just not worth it to me and you wont get much power from it.

3rd gen 3sge JDM has 178 hp at 7,000 rpm with 142 ft-lb torque
4th gen 3sge Beams Redtop JDM only has 197 hp at 7,000 rpm with 152 ft-lb torque.

getting parts and mods for the 3rd gen will be alot easier to find then getting 4th gen 3sge Beams Redtop.

one thing that puzzles me is why the 4th gen 3sge only redlines to 7,000 rpm. It doesnt make any sense at all. I mean the 3rd gen revs to 7,000. So that should make the 4th gen rev to at least 7,500 rpm.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 1:56 AM