Driver seat swap, Seat belt latch Options

[Bigblock]

Hey folks-- so I swapped my driver seat a few mins ago. I read all the threads to do w/seats.I estmtd my time to be about 1 1/2 hrs. Well---it's ME so I added more time.

OK-it took 30 mins!!5 was trying to unplug the wire under the seat with out breaking either end,another 5 lining up the bolt holes!!
10 trying to put the plastic bolt covers on w/out breaking them.
CRAP--broke 1!!
The seat belt latch doesn't work!!CRAP!! IDK how to remove lumbar knob!!

So here's my Qs--
(1) How do I get the latch off the bad seat??
(2) How do I get the lumbar knob off the bad seat??

It's too dark & too cold now.I can do this first thing in the A.M.

Thanks every1 for any tips//help

Rob

[hurley97]

To get the female part of the seatbelt latch out you just need to take the seat back out and take off that side plastic piece, it unbolts from behind the plastic.
94-95 seatbelt latch is different from 96+. 94-95 is also longer from the attaching point to the latch because it bolts to the track in a different place, so it'll bolt in and work just fine but may look like it sticks up a little too far when you are done.

And the lumbar knob is just like griff said, you can just pry it off but more than likely you'll break it that way. If you do end up having to do it that way it'll go back on just fine.