What gauges can i install?, 94 ST |
What gauges can i install?, 94 ST |
Dec 16, 2009 - 12:42 AM |
|
Enthusiast Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
I have a 94 ST 7afe. and i want to get some 52mm gauges to go on the A-pillar. But i really dont understand how any of them hook up? Like oil pressure? can i do that in an ST
I am looking for something cheap, not a wideband air/fuel $300 thing. If anyone could give me some pointers, on an ST installation id b very happy I want to find 3 or at least 2 thanks in advance-! -------------------- |
Dec 16, 2009 - 1:54 PM |
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Buy a sandwich adapter for the oil temp and oil pressure. It screws on where your oil filter is, and then the filter screws onto that. The sending unit fittings screw right into the two outlets on the sandwich adapter. Then you just run the lines in through the firewall and up the A-pillar. Oil pressure and oil temp are real easy to do.
Water temp is easy too, if you don't want to look at the idiot gauge in the cluster. Cut the upper rad hose and stick the sending unit in-line, then run the wiring back. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
Lo-Fi Version | Time is now: January 8th, 2025 - 10:05 AM |